Holybro X500 V2 Kits

Holybro X500 V2 Kits: פריט בקטלוג Holybro, בקטגוריית ערכות פיתוח ושלדות. הדף מיועד לבדיקת התאמה ולפנייה לגבי אספקה לשימוש אזרחי.

מפרט הדגם

הערות טכניות מהיצרן

Almost Ready-to-Fly (ARF) Kit Feature:

New design and minimal assembly time (~15 minutes)

Carbon Fiber frame with fiber-reinforced nylon connectors providing easy & straightforward installation

Pre-installed motors & ESCs with simple XT30 power plugs for PDB

Power distribution board (PDB) with XT60 & XT30 plugs - no soldering needed

Mount for companion computers such as Raspberry Pi & Nvidia Jetson Nano

Optional depth camera mount for Intel RealSense & Structure Core

Mounting holes ready for Pixhawk Jetson baseboard (require standoffs)

Note: Full X500 v2 Development Kit with Flight Controller, GPS, Telemetry Radio can be purchase here.

X500 V2 ARF Kit (SKU30125):

X500 V2 Frame Kit

With Preinstalled Items: Motors - Holybro 2216 KV920 Motor (4 pcs) with XT30 Plug (Motor Specification can be found here) ESCs - BLHeli S ESC 20A (4 pcs) 1045 Propellers (6 pcs) with retainer Power Distribution Board – XT60 plug for battery & XT30 plug for ESCs & peripherals

Motors - Holybro 2216 KV920 Motor (4 pcs) with XT30 Plug (Motor Specification can be found here)

ESCs - BLHeli S ESC 20A (4 pcs)

1045 Propellers (6 pcs) with retainer

Power Distribution Board – XT60 plug for battery & XT30 plug for ESCs & peripherals

Newly added propeller retainer to prevent fly-offs

Note: Depth camera mount is sold separately.

Body - Full Carbon Fiber Top & Bottom plate (144 x 144mm, 2mm thick)

Arm - High strength & ultra-lightweight 16mm carbon fiber tubes with newly designed fiber-reinforced nylon connectors

Landing gear - 16mm & 10mm diameter carbon fiber tubes with strengthened & improved plastic tee connectors.

Platform board - With mounting holes for GPS & popular companion computers such as the Raspberry Pi 4 & Jetson Nano

Dual 10mm Ø rod x 250 mm long rail mounting system

Battery mount with two Battery Straps

Hand tools for installation

Wheelbase: 500mm

Motor mount pattern: 16x16mm & 19x19mm

Frame Body: 144x144mm, 2mm thick

Landing gear height: 215mm

Space between top and bottom plates: 28mm

Flight time: ~18 minutes hover with no additional payload. Tested with 5000mAh Battery.

Payload: 1500g (without Battery, 70% Throttle)

Battery Recommendation: 4S 3000-5000mAh 20C+ with XT60 Lipo Battery (Not Included)

Flight Controller - Pixhawk 6C, Pixhawk 6x

Power Module - PM02D, PM03D Power Module, PM02 V3,

GPS - DroneCAN M8N/M9N GPS, Holybro M8N/M9N GPS, H-RTK F9P Rover Lite & Helical

X500 v2 Assembly Guide

Motor specification

Holybro_X500_V2_3D Print

A8 mini Gimbal Camera

גרסאות ותצורות בקטלוג היצרן

פנייה לגבי המוצר

זמינות, מחיר, תכולת החבילה וגרסת החומרה יאושרו בפנייה. אין בדף התחייבות למלאי מקומי, זמן אספקה או מעמד של נציגות רשמית. יש לוודא התאמה למתח, למחברים, לקושחה ולדרישות ההפעלה לפני שימוש.

• מסמכי יצרן