דלג לתוכן המרכזי

Holybro H-RTK ZED-F9P Ultralight


  • מותג:Holybro
  • קוד מוצר:Holybro H-RTK ZED-F9P Ultralight
  • זמינות:זמינות בכפוף לאישור

מחירים אינם מוצגים באתר בכוונה. צרו קשר עם RC-MODEL לקבלת זמינות עדכנית, התאמה טכנית, אביזרים תואמים והצעת מחיר מסודרת.

אפשרויות זמינות

כמות להצעת מחיר בחרו כמות רצויה, סמנו אפשרויות/וריאנטים אם קיימים, והוסיפו את הפריט לבקשה מרוכזת.

הבחירה כאן תישלח אלינו יחד עם המק"ט, הדגם והכמות כדי שנוכל לבדוק התאמה וזמינות.

Holybro H-RTK ZED-F9P Ultralight: פריט בקטלוג Holybro, בקטגוריית ניווט GNSS ו-RTK. הדף מיועד לבדיקת התאמה ולפנייה לגבי אספקה לשימוש אזרחי.

מפרט הדגם

מותגHolybro
דגםH-RTK ZED-F9P Ultralight
GNSS moduleu-blox ZED-F9P
CompassIST8310
ApplicationRover (Aircraft)
GNSSGPS / QZSS, GLONASS, Galileo, BeiDou
GNSS BandL1C/A, L2C, L1OF, L2OF, E1B/C, E5b, B1I, B2I
Reacquisition-147dBm
Warm Start20s
Hot Start1 s
RTK1cm+1ppm (Horizontal)3
Altitude18000 m
Velocity515 m/s
Baud Rate38400-230400 bps(Default 115200 bps)
Max navigation update rateRAW 25Hz (only achievable with GPS-only mode) RTK 20Hz (only achievable with GPS-only mode) Moving Baseline 8Hz (only achievable with GPS-only mode)

הערות טכניות מהיצרן

U-blox ZED-F9P GNSS module

Ultralight weight, less than 25 grams

Integrated helical antenna

IST8310 compass

H-RTK F9P Ultralight is an ultra-lightweight RTK GNSS module with U-blox ZED-F9P, an IST8310 compass, and an integrated helical antenna. It is designed specifically for weight-conscious applications where every gram counts. The H-RTK F9P Ultralight can receive and track multiple GNSS systems. Owing to the multi-band RF front-end architecture, all four major GNSS constellations (GPS, GLONASS, Galileo, and BDS) can be received concurrently. All satellites in view can be processed to provide an RTK navigation solution when used with correction data.

It can be configured for concurrent GPS, GLONASS, Galileo, BDS, QZSS, and SBAS reception to provide a high-performance position reporting and navigation solution. It provides exceptional sensitivity and acquisition times, and interference suppression measures enable reliable positioning even in difficult signal conditions.

Note: The bottom 3 mounting holes are made for self-tapping screws. They are 1.7mm holes with 4mm of depth.

You can use PA2.0*4 or KA2.0*4. But the actual specification of the screw to be used depends on what it is to be installed on and how thick it is. The required torque is about 0.08-0.15N/M.

Ardupilot IST8310 Compass Orientation

H-RTK F9P Ultralight *1

GH 10P cable 400mm *1

GH 6P cable 400mm *1

טבלאות טכניות ותצורות מהיצרן

GNSS moduleu-blox ZED-F9P
CompassIST8310
ApplicationRover (Aircraft)
GNSSGPS / QZSS, GLONASS, Galileo, BeiDou
GNSS BandL1C/A, L2C, L1OF, L2OF, E1B/C, E5b, B1I, B2I
SensitivityTracking-163dBm
Reacquisition-147dBm
Time-To-First-Fix¹Cold Start≤35 s
Warm Start20s
Hot Start1 s
Position accuracy²Autonomous2.0 m CEP
DGNSS0.5m CEP
RTK1cm+1ppm (Horizontal)3
Accuracy of time pulse signalRMS30ns
Velocity accuracyGNSS0.1 m/s
D-GNSS0.05 m/s
Operational limits4Dynamics≤ 4 g
Altitude18000 m
Velocity515 m/s
Baud Rate38400-230400 bps(Default 115200 bps)
Max navigation update rateRAW 25Hz (only achievable with GPS-only mode) RTK 20Hz (only achievable with GPS-only mode) Moving Baseline 8Hz (only achievable with GPS-only mode)
RAW25Hz (only achievable with GPS-only mode)
RTK20Hz (only achievable with GPS-only mode)
Moving Baseline8Hz (only achievable with GPS-only mode)
1. All satellites at ≥-130dBm 2. CEP, 50%, 24 hours static, ≥-130dBm, > 8SVs 3. Based on 30km, the accuracy error increases by 1cm every 10km from the base station 4. Assuming Airborne < 4 g platform
RAW25Hz (only achievable with GPS-only mode)
RTK20Hz (only achievable with GPS-only mode)
Moving Baseline8Hz (only achievable with GPS-only mode)
No.NameI/ODescription
1VCCPMain supply
2RX1IGPS RX1
3TX1OGPS TX1
4SCLI/OI2C Clock(keep open if not used)
5SDAI/OI2C Clock(keep open if not used)
6RX2IGPS RX2
7TX2OGPS TX2
8GNDGGround

גרסאות ותצורות בקטלוג היצרן

תצורהמק״ט יצרן
H-RTK ZED-F9P Ultralight12078
H-RTK F9P (Legacy)12053

פנייה לגבי המוצר

זמינות, מחיר, תכולת החבילה וגרסת החומרה יאושרו בפנייה. אין בדף התחייבות למלאי מקומי, זמן אספקה או מעמד של נציגות רשמית. יש לוודא התאמה למתח, למחברים, לקושחה ולדרישות ההפעלה לפני שימוש.

  • מסמכי יצרן

מקורות ומסמכי יצרן

מדריכים רלוונטיים ממרכז הידע

לומדים לפני שקונים

המדריכים האלו מסבירים את ההרכבה, בדיקות הבטיחות ובחירת האביזרים שבדרך כלל חשובים לסוג המוצר הזה.

טיסנים

איך לבחור טיסן ראשון

מסלול ברור לטיסנאי מתחיל: Trainer, Glider, Warbird, 3D, EDF Jet, ARF, PNP, RTF, מערכת הנעה, רדיו ומה לבדוק לפני קנייה.

תחזוקה

בדיקות חובה לפני טיסה

שגרת בדיקה חוזרת לפני הטסה: כיוון הגאים, טווח רדיו, Failsafe, סוללה, ברגים, פרופלור, CG וציוד שטח.

מדריכים מקומיים לישראל

מדריך שירות ותיקונים בארץ

מדריך מעשי ללקוחות בישראל: איך לשלוח דגם לבדיקה, איך לתאר תקלה, אילו חלקים להזמין ומה בדרך כלל ניתן לתקן.

תגיות: Holybro,