Servo selection: torque, speed, gears and voltage
How to select servos for trainers, sport aircraft, large models, cars and boats without under-sizing a control surface.
S9110BL 1/5 Digital HV High Speed Brushless Metal Gear Surface Servo
Prices are intentionally not displayed on the site.
Contact RC-MODEL for current availability, technical fit, compatible accessories and a formal quote.
S9110BL 1/5 Digital HV High Speed Brushless Metal Gear Surface Servo is a Spektrum product intended for surface RC vehicles, crawlers, bashers and race setups that need dependable Spektrum control electronics. This page presents the practical buying information a customer needs before ordering: fit, SKU, image, category, specifications and usage advantages.
The content is written for purchasing through RC-MODEL, without supplier prices or links to competing stores.
Key Advantages
- Organized under the Spektrum servo range.
- Intended for surface RC vehicles, crawlers, bashers and race setups that need dependable Spektrum control electronics.
- Check model fit, connector type, voltage range and Spektrum protocol compatibility before ordering.
- Includes local product imagery and structured specifications for easier comparison inside RC-MODEL.
Core Specifications
- Manufacturer: Spektrum
- Brand: Spektrum
- Product Code: SPMSS9110BL
- Product Family: Spektrum servo range
- Application: Surface
- Compatibility Focus: Check model fit, connector type, voltage range and Spektrum protocol compatibility before ordering.
- Spektrum Category: Radios / Surface / Servos
- Motor Type: Brushless
- Gear Type: Metal
- Bushing Or Bearing: Bearing
- Connector Wire Length: 6 in (152mm)
- Deadband: Micro sec: < 1
- Material: Metal
- Maximum Servo Torque: 867 oz-in (62.43 kg-cm) @ 6.0V, 981.75 oz-in (70.69 kg-cm) @ 7.4V, 1224.3 oz-in (88.16 kg-cm) @ 8.4V
Relevant RC Academy guides
Learn before you buy
These guides explain the setup, safety checks and accessory choices that usually matter for this product type.
Which servo fits each RC aircraft type?
A buying table for matching servo size, torque, speed, gear type and voltage to trainers, gliders, 3D aircraft, EDF jets and Giant Scale models.
How to install servos and linkages correctly
Mechanical setup guide for servo arms, linkage angles, throw, control horns, neutral position and radio setup after geometry is correct.
How to set Dual Rates and Expo on an RC transmitter
Make an aircraft calmer for beginners by setting low rates, high rates and expo without hiding mechanical setup problems.
How to set failsafe correctly on an RC aircraft
Failsafe setup for electric and fuel aircraft: throttle behavior, receiver signal loss, switch positions and safe verification before flight.
| Technical Specifications | |
| Manufacturer | Spektrum |
| Brand | Spektrum |
| Product Code | SPMSS9110BL |
| Spektrum Category | Radios / Surface / Servos |
| Product Family | Spektrum servo range |
| Application | Surface |
| Compatibility Focus | Check model fit, connector type, voltage range and Spektrum protocol compatibility before ordering. |
| Product Height | 1.84 in (27.2mm) |
| Product Length | 2.47 in (62.7mm) |
| Product Weight | 6.3 oz (178.6g) |
| Product Width | 1.18 in (30mm) |
| Gear Type | Metal |
| Servo Operating Voltage | 6.0 - 8.4V (HV) |
| Servo Size Category | Giant Scale |
| Motor Type | Brushless |
| Product Application | Surface |
| Material | Metal |
| Connector Wire Length | 6 in (152mm) |
| Bushing Or Bearing | Bearing |
| Maximum Servo Torque | 867 oz-in (62.43 kg-cm) @ 6.0V, 981.75 oz-in (70.69 kg-cm) @ 7.4V, 1224.3 oz-in (88.16 kg-cm) @ 8.4V |
| Deadband | Micro sec: < 1 |
| Type | Surface |
Tags: Spektrum, SPMSS9110BL, Spektrum servo range, Spektrum Catalog, Spektrum Servos, Spektrum Standard Servos, Spektrum Surface Electronics, RC-MODEL