How to assemble an ARF RC aircraft step by step
A general ARF assembly workflow for many aircraft: dry fit, hinges, servo installation, power setup, CG, control checks and first-flight preparation.
Servo SAVÖX SA-1283SG+
Prices are intentionally not displayed on the site.
Contact RC-MODEL for current availability, technical fit, compatible accessories and a formal quote.
Servo SAVÖX SA-1283SG+
Servo SAVÖX SA-1283SG+ is a professional Servo Plane item from SieBra GmbH & Co. KG, prepared for the RC-MODEL catalog with customer-facing information, official product imagery, structured specifications and no storefront supplier pricing.
Recommended use
This product is relevant for RC builders and pilots looking for servo plane, replacement parts, upgrades or setup components. Use it when planning a new model build, maintaining an existing aircraft, boat or radio system, or comparing compatible electronic and power-system parts.
What to check before ordering
Confirm the physical dimensions, weight, voltage, current rating, connector style, shaft size, cell count, propeller range and installation space against your model. RC-MODEL can help verify compatibility when you provide the model name and part number.
Key details
- Recommended application area: Helicopter, aircraft, car
- Classification: Standard
- Length: 40.8mm (1.61 in)
- Width: 20.2mm (0.8in)
- Height: 36.4mm (1.43in)
- Weight: 80.0g (2.82oz)
- High voltage capable: no
- Voltage 1 (V1): 4.8V
- Voltage 2 (V2): 6.0V
- Regulating time V1/60°: 0.16s
- Regulating time V2/60°: 0.13s
- Pulling load V1: 25.0kg
- Pulling load V2: 30.0kg
- Number of ball bearings: 2
Servo SAVÖX SA-1283SG+ Product description and features New + version with softstart, Sanwa SSR mode Extremely powerful digital servo, ideal for wing models, robust low-backlash titanium gearbox 0,16/0,13 sec/60 degrees and 25/30 kg*cm at 4,8/6,0 Volt Dimensions (L/W/H): 40.8 x 20.2 x 36.4 mm Weight: 80 grams The SA-1283SG+ is an extremely powerful servo of the standard size which is very well suited for use in wing models. Of course it can also be used in RC cars. The application as swashplate
Reference SKU/model: 80101131. Mention this reference when contacting RC-MODEL for availability or fitment support.
Relevant RC Academy guides
Learn before you buy
These guides explain the setup, safety checks and accessory choices that usually matter for this product type.
Servo selection: torque, speed, gears and voltage
How to select servos for trainers, sport aircraft, large models, cars and boats without under-sizing a control surface.
How to balance an RC aircraft and find the correct CG
One of the most important setup guides: find the CG, install the flight battery, balance the aircraft and avoid nose-heavy or tail-heavy surprises.
Mandatory pre-flight checks for safer RC flying
A repeatable inspection routine for control direction, radio range, failsafe, battery, fasteners, propeller, CG and field readiness.
How to perform the first test flight of an RC aircraft
Ground checks, takeoff planning, trim passes, battery timing and first landing strategy for a new or repaired RC aircraft.
| Technical Specifications | |
| Manufacturer | SieBra GmbH & Co. KG |
| Product Type | Servo Plane |
| SKU | 80101131 |
| EAN | 4710006994468 |
| Availability | In stock |
| Recommended application area | Helicopter, aircraft, car |
| Classification | Standard |
| Length | 40.8mm (1.61 in) |
| Width | 20.2mm (0.8in) |
| Height | 36.4mm (1.43in) |
| High voltage capable | no |
| Voltage 1 (V1) | 4.8V |
| Voltage 2 (V2) | 6.0V |
| Regulating time V1/60° | 0.16s |
| Regulating time V2/60° | 0.13s |
| Pulling load V1 | 25.0kg |
| Pulling load V2 | 30.0kg |
| Number of ball bearings | 2 |
| Housing type | Full metal |
| Motor type | Coreless motor |
| Transmission type | Steel |
| Number of output cogs | 25 |
| Weight | 80.0g (2.82oz) |
Tags: SieBra GmbH & Co. KG, Servo SAVÖX SA-1283SG+, Servos, Savöx Servos, Servo Plane