Servo selection: torque, speed, gears and voltage
How to select servos for trainers, sport aircraft, large models, cars and boats without under-sizing a control surface.
Discontinued - Use SW0241MGP - SW0241MG - Waterproof 1/5 Scale Digital High Voltage Servo, .17/555 @ 7.4V
Prices are intentionally not displayed on the site.
Contact RC-MODEL for current availability, technical fit, compatible accessories and a formal quote.
Why choose Discontinued - Use SW0241MGP - SW0241MG - Waterproof 1/5 Scale Digital High Voltage Servo, .17/555 @ 7.4V through RC-MODEL?
Discontinued - Use SW0241MGP - SW0241MG - Waterproof 1/5 Scale Digital High Voltage Servo, .17/555 @ 7.4V is an RC product from Savox. This page focuses on what an end customer needs: fit, use cases, specifications and imagery, without prices or outbound supplier detours.
Fit and use
Discontinued - Use SW0241MGP - SW0241MG - Waterproof 1/5 Scale Digital High Voltage Servo, .17/555 @ 7.4V fits customers looking for Savox items in High Voltage Servos, with RC-MODEL support for choosing the right configuration.
- Relevant category: High Voltage Servos
- Product identification for inquiry: model SAVSW0241MG / SKU SAVSW0241MG
Key details
- Product Type: Servos
- Weight: 200.0g
- Motor Type: Brushed
Before ordering
- Confirm dimensions, power system, radio compatibility or material size before purchase.
- Ask us to match required accessories, adhesives, hardware, batteries or replacement parts.
- RC-MODEL helps with fit checks, availability, compatible accessories and a formal quote in Israel.
Discontinued - Use SW0241MGP - SW0241MG - Waterproof 1/5 Scale Digital High Voltage Servo, .17/555 @ 7.4V
Discontinued - Use SW0241MGP - SW0241MG - Waterproof 1/5 Scale Digital High Voltage Servo, .17/555 @ 7.4V is presented as an information-rich high voltage RC servo from Savox for RC-MODEL customers who want clear product data, official imagery, and practical comparison details without storefront pricing.
Key Specifications
- Dimensions L x W x H (mm): 65.8 x 30.0 x 59.1
- Weight: 200.0g
- Operating Temperature: 14° - 122°F (-10° - 50°C)
- Running Current (no load): 150mA @6.0V, 180mA @7.4V
- Stall Current (at locked): 4600mA @6.0V, 5700mA @7.4V
- Idle Current: 5mA @4.8V, 5mA @6.0V
- Wire Length: 200 ± 5mm
- Output Gear Spline: 15 Tooth
- Bearings: 2BB
- Operating Travel: 100° (1000 → 2000 µ second)
- Neutral Position: 1500 µ second
- Pulse Width Range: 800 → 2200 µ second
Recommended Use
This catalog page is written for pilots, builders, racers, and RC hobby users comparing high voltage servos products. It highlights the manufacturer, model identity, application, and measurable details that matter when choosing compatible RC equipment.
Relevant RC Academy guides
Learn before you buy
These guides explain the setup, safety checks and accessory choices that usually matter for this product type.
Which servo fits each RC aircraft type?
A buying table for matching servo size, torque, speed, gear type and voltage to trainers, gliders, 3D aircraft, EDF jets and Giant Scale models.
How to install servos and linkages correctly
Mechanical setup guide for servo arms, linkage angles, throw, control horns, neutral position and radio setup after geometry is correct.
How to set Dual Rates and Expo on an RC transmitter
Make an aircraft calmer for beginners by setting low rates, high rates and expo without hiding mechanical setup problems.
How to set failsafe correctly on an RC aircraft
Failsafe setup for electric and fuel aircraft: throttle behavior, receiver signal loss, switch positions and safe verification before flight.
| Technical Specifications | |
| Product Type | Servos |
| Weight | 200.0g |
| Motor Type | Brushed |
Tags: Savox, Discontinued - Use SW0241MGP - SW0241MG - Waterproof 1/5 Scale Digital High Voltage Servo, .17/555 @ 7.4V, Servos, High Voltage Servos