How to assemble an ARF RC aircraft step by step
A general ARF assembly workflow for many aircraft: dry fit, hinges, servo installation, power setup, CG, control checks and first-flight preparation.
SG0212MG - High Voltage Metal Gear Glider Wing Servo, 0.09sec / 83.3oz @ 8.4V
Prices are intentionally not displayed on the site.
Contact RC-MODEL for current availability, technical fit, compatible accessories and a formal quote.
SG0212MG - High Voltage Metal Gear Glider Wing Servo, 0.09sec / 83.3oz @ 8.4V
SG0212MG - High Voltage Metal Gear Glider Wing Servo, 0.09sec / 83.3oz @ 8.4V is presented as an information-rich high voltage RC servo from Savox for RC-MODEL customers who want clear product data, official imagery, and practical comparison details without storefront pricing.
Key Specifications
- Dimensions L x W x H mm: 26.0x8.0x37.5
- Weight: 22g
- Operating Temperature: 14° - 122°F (-10° - 50°C)
- Running Current (no load): 120mA @4.8V, 180mA @6.0V
- Stall Current (at locked): 1100mA @4.8 V, 1300mA @6.0V
- Idle Current: 5mA @4.8V, 5mA @6.0V
- Wire Length: 250 ± 5mm
- Output Gear Spline: 21 Tooth
- Bearings: 2BB
- Operating Travel: 100° (1000 → 2000 µ second)
- Neutral Position: 1500 µ second
- Pulse Width Range: 800 → 2200 µ second
Recommended Use
This catalog page is written for pilots, builders, racers, and RC hobby users comparing high voltage servos products. It highlights the manufacturer, model identity, application, and measurable details that matter when choosing compatible RC equipment.
Relevant RC Academy guides
Learn before you buy
These guides explain the setup, safety checks and accessory choices that usually matter for this product type.
Servo selection: torque, speed, gears and voltage
How to select servos for trainers, sport aircraft, large models, cars and boats without under-sizing a control surface.
How to balance an RC aircraft and find the correct CG
One of the most important setup guides: find the CG, install the flight battery, balance the aircraft and avoid nose-heavy or tail-heavy surprises.
Mandatory pre-flight checks for safer RC flying
A repeatable inspection routine for control direction, radio range, failsafe, battery, fasteners, propeller, CG and field readiness.
How to perform the first test flight of an RC aircraft
Ground checks, takeoff planning, trim passes, battery timing and first landing strategy for a new or repaired RC aircraft.
| Technical Specifications | |
| Product Type | Servos |
| Weight | 22g |
| Motor Type | Brushed |
Tags: Savox, SG0212MG - High Voltage Metal Gear Glider Wing Servo, 0.09sec / 83.3oz @ 8.4V, Servos, High Voltage Servos