How to assemble an ARF RC aircraft step by step
A general ARF assembly workflow for many aircraft: dry fit, hinges, servo installation, power setup, CG, control checks and first-flight preparation.
TX16S (V1) Hall Gimbal Edition-Mode 2
Prices are intentionally not displayed on the site.
Contact RC-MODEL for current availability, technical fit, compatible accessories and a formal quote.
Why choose TX16S (V1) Hall Gimbal Edition-Mode 2 through RC-MODEL?
TX16S (V1) Hall Gimbal Edition-Mode 2 is an RC product from RadioMaster. This page focuses on what an end customer needs: fit, use cases, specifications and imagery, without prices or outbound supplier detours.
Fit and use
TX16S (V1) Hall Gimbal Edition-Mode 2 fits customers looking for RadioMaster items in TX16S Radio, with RC-MODEL support for choosing the right configuration.
- Relevant category: TX16S Radio
- Product identification for inquiry: model HP157.0001-A-M2-V1 / SKU HP157.0001-A-M2-V1
Key details
- Weight: 750g (without battery) / 820g (with 2 x 18650 batteries installed)
- Channels: 16 channels
- Size: 286.9*128.9*183.8mm
- Voltage: DC7-8.4V
- Channel: 16ch
- Manufacturer: RadioMaster
Before ordering
- Confirm dimensions, power system, radio compatibility or material size before purchase.
- Ask us to match required accessories, adhesives, hardware, batteries or replacement parts.
- RC-MODEL helps with fit checks, availability, compatible accessories and a formal quote in Israel.
TX16S (V1) Hall Gimbal Edition-Mode 2 is a RadioMaster product intended for pilots who need a capable programmable transmitter for aircraft, helicopters, FPV, gliders or surface models. This page presents the practical buying information in one place: compatibility, SKU, variants, radio protocol, use case and technical details.
The content is written for customer decision-making through RC-MODEL, without supplier prices or outbound purchase routes.
Key Advantages
- Organized for pilots who need a capable programmable transmitter for aircraft, helicopters, FPV, gliders or surface models.
- Part of the TX16S transmitter platform.
- RF/protocol context: 4-in-1 Multi-Protocol, EdgeTX.
- Compatibility note: Compatible with RadioMaster TX16S platform where applicable.
- Includes local product imagery and structured specifications for customer comparison.
Core Specifications
- Product Code: HP157.0001-A-M2-V1
- Product Family: TX16S transmitter platform
- Protocol / RF: 4-in-1 Multi-Protocol, EdgeTX
- Channels: 16 channels
- Compatibility: Compatible with RadioMaster TX16S platform where applicable
- Voltage: DC7-8.4V
- Battery: 2 x 18650 (tray supplied) or 2S lipo (batteries not included)
- Weight: 750g (without battery) / 820g (with 2 x 18650 batteries installed)
- Type: TX16S Hall Radio Controller
- Size: 286.9*128.9*183.8mm
- Current: 350mah (NO CRSF)
- Channel: 16ch
- External Micro SD slot: Card Included
Relevant RC Academy guides
Learn before you buy
These guides explain the setup, safety checks and accessory choices that usually matter for this product type.
Servo selection: torque, speed, gears and voltage
How to select servos for trainers, sport aircraft, large models, cars and boats without under-sizing a control surface.
How to balance an RC aircraft and find the correct CG
One of the most important setup guides: find the CG, install the flight battery, balance the aircraft and avoid nose-heavy or tail-heavy surprises.
Mandatory pre-flight checks for safer RC flying
A repeatable inspection routine for control direction, radio range, failsafe, battery, fasteners, propeller, CG and field readiness.
How to perform the first test flight of an RC aircraft
Ground checks, takeoff planning, trim passes, battery timing and first landing strategy for a new or repaired RC aircraft.
| Technical Specifications | |
| Manufacturer | RadioMaster |
| Brand | RadioMaster |
| Product Code | HP157.0001-A-M2-V1 |
| All Variant SKUs | HP157.0001-A-M2-V1 |
| Product Type | TX16S Radio |
| Product Family | TX16S transmitter platform |
| Application | pilots who need a capable programmable transmitter for aircraft, helicopters, FPV, gliders or surface models |
| Weight | 750g (without battery) / 820g (with 2 x 18650 batteries installed) |
| Compatibility | Compatible with RadioMaster TX16S platform where applicable |
| Protocol / RF | 4-in-1 Multi-Protocol, EdgeTX |
| Channels | 16 channels |
| Battery | 2 x 18650 (tray supplied) or 2S lipo (batteries not included) |
| Size | 286.9*128.9*183.8mm |
| Type | TX16S Hall Radio Controller |
| Current | 350mah (NO CRSF) |
| Voltage | DC7-8.4V |
| Channel | 16ch |
| External Micro SD slot | Card Included |
Tags: RadioMaster, HP157.0001-A-M2-V1, TX16S Radio, RC radio