Radio systems and receivers: choosing a reliable control link
Channels, receiver protocols, telemetry, range, redundancy and what to check before matching a transmitter to a model.
T8 Pro Radio Controller
Prices are intentionally not displayed on the site.
Contact RC-MODEL for current availability, technical fit, compatible accessories and a formal quote.
T8 Pro Radio Controller is a RadioMaster product intended for pilots who need a capable programmable transmitter for aircraft, helicopters, FPV, gliders or surface models. This page presents the practical buying information in one place: compatibility, SKU, variants, radio protocol, use case and technical details.
The content is written for customer decision-making through RC-MODEL, without supplier prices or outbound purchase routes.
Key Advantages
- Organized for pilots who need a capable programmable transmitter for aircraft, helicopters, FPV, gliders or surface models.
- Part of the RadioMaster radio-control electronics.
- RF/protocol context: 4-in-1 Multi-Protocol.
- Multiple variants are documented for easier matching to the required setup.
- Includes local product imagery and structured specifications for customer comparison.
Core Specifications
- Product Code: HP0157.0010-M1
- Product Family: RadioMaster radio-control electronics
- Protocol / RF: 4-in-1 Multi-Protocol
- Channels: Up to 16 channels (depending on the model / receiver)
- Available Variants: Mode 1; Mode 2
- Battery: Built-in 3.7v 1000mah Lithium battery
- Frequency: 2.400GHZ-2.480GHZ
- Weight: 266g
- Type: T8 Pro Radio Controller
- RF Module: Multi-Protocol Module Compatible Single-chip (CC2500); Multi-Protocol Module Compatible Single chip (CC2500)
- Size: 160*130*60mm
- Protocol Options: All CC2500 - Frsky, S-FHSS, RadioLink, Graupner HoTT and more*
- Transmission power: 100mW by default
Relevant RC Academy guides
Learn before you buy
These guides explain the setup, safety checks and accessory choices that usually matter for this product type.
How to bind an RC transmitter and receiver
A practical binding guide for matching protocol, bind mode, receiver power, model memory, control checks and common binding mistakes.
How to set failsafe correctly on an RC aircraft
Failsafe setup for electric and fuel aircraft: throttle behavior, receiver signal loss, switch positions and safe verification before flight.
How to set Dual Rates and Expo on an RC transmitter
Make an aircraft calmer for beginners by setting low rates, high rates and expo without hiding mechanical setup problems.
How to perform the first test flight of an RC aircraft
Ground checks, takeoff planning, trim passes, battery timing and first landing strategy for a new or repaired RC aircraft.
| Technical Specifications | |
| Manufacturer | RadioMaster |
| Brand | RadioMaster |
| Product Code | HP0157.0010-M1 |
| All Variant SKUs | HP0157.0010-M1, HP0157.0010-M2 |
| Available Variants | Mode 1; Mode 2 |
| Product Type | T8 Radio |
| Product Family | RadioMaster radio-control electronics |
| Application | pilots who need a capable programmable transmitter for aircraft, helicopters, FPV, gliders or surface models |
| Weight | 266g |
| Protocol / RF | 4-in-1 Multi-Protocol |
| Frequency | 2.400GHZ-2.480GHZ |
| Channels | Up to 16 channels (depending on the model / receiver) |
| Charging | Built-in USB-C charging |
| Battery | Built-in 3.7v 1000mah Lithium battery |
| Range | > 1km @ 20dbm (depending on the receiver) |
| Size | 160*130*60mm |
| Gimbal | High-precision quad ball bearing HALL Sensor gimbal |
| Type | T8 Pro Radio Controller |
| RF Module | Multi-Protocol Module Compatible Single-chip (CC2500); Multi-Protocol Module Compatible Single chip (CC2500) |
| Protocol Options | All CC2500 - Frsky, S-FHSS, RadioLink, Graupner HoTT and more* |
| Transmission power | 100mW by default |
| Firmware | OpenTX - Multiprotocol-TX-Module |
| Screen | Clip-on 128x64 LCD and OpenTX control module |
| Voice support | Yes (SD Card required) |
Tags: RadioMaster, HP0157.0010-M1, T8 Radio, RC radio