How to assemble an ARF RC aircraft step by step
A general ARF assembly workflow for many aircraft: dry fit, hinges, servo installation, power setup, CG, control checks and first-flight preparation.
RP4TD ExpressLRS 2.4GHz True Diversity Receiver is an RC product from RadioMaster. This page focuses on what an end customer needs: fit, use cases, specifications and imagery, without prices or outbound supplier detours.
RP4TD ExpressLRS 2.4GHz True Diversity Receiver fits customers looking for RadioMaster items in Receiver, ExpressLRS Receivers, with RC-MODEL support for choosing the right configuration.
RP4TD ExpressLRS 2.4GHz True Diversity Receiver is a RadioMaster product intended for RC aircraft, FPV, surface and telemetry receiver installations. This page presents the practical buying information in one place: compatibility, SKU, variants, radio protocol, use case and technical details.
The content is written for customer decision-making through RC-MODEL, without supplier prices or outbound purchase routes.
These guides explain the setup, safety checks and accessory choices that usually matter for this product type.
A general ARF assembly workflow for many aircraft: dry fit, hinges, servo installation, power setup, CG, control checks and first-flight preparation.
How to select servos for trainers, sport aircraft, large models, cars and boats without under-sizing a control surface.
One of the most important setup guides: find the CG, install the flight battery, balance the aircraft and avoid nose-heavy or tail-heavy surprises.
A repeatable inspection routine for control direction, radio range, failsafe, battery, fasteners, propeller, CG and field readiness.
Ground checks, takeoff planning, trim passes, battery timing and first landing strategy for a new or repaired RC aircraft.
| Technical Specifications | |
| Manufacturer | RadioMaster |
| Brand | RadioMaster |
| Product Code | HP0157.RX-RP4TD |
| All Variant SKUs | HP0157.RX-RP4TD, HP0157.RX-RP4TD-LBT |
| Available Variants | FCC; LBT |
| Product Type | Receiver |
| RadioMaster Collections | ELRS Receivers |
| Product Family | RadioMaster receiver range |
| Application | RC aircraft, FPV, surface and telemetry receiver installations |
| Item | RP4TD ExpressLRS 2.4GHz Diversity Receiver |
| Weight | 1.4g (without antenna) |
| Compatibility | all 2 |
| Protocol / RF | ExpressLRS / ELRS, Gemini Xrossband, 2.4GHz |
| Type | ISM |
| Antenna | 65mm 2.4GHz T Antenna x 2 |
| MCU | ESP32 |
| RF Chip | SX1281 x 2 |
| Frequency Range | 2.4GHz |
| Maximum Refresh Rate | 500Hz / F1000Hz |
| Telemetry RF Power | Max 2x 100mW |
| FW Target | RadioMaster RP4TD 2400 RX |
| Bus interface | CRSF |
| Dimension | 23.7*16.3*4.0mm |
| Firmware Version | ExpressLRS V3.3.0 pre-installed |
| Working Voltage | DC 4.5-12.0V |
| Extend interface | UART |
Tags: RadioMaster, HP0157.RX-RP4TD, ExpressLRS Receivers, Receiver, RC radio
We use essential cookies to operate the store. Optional cookies are used only with your consent. You can read the full policy here.