How to assemble an ARF RC aircraft step by step
A general ARF assembly workflow for many aircraft: dry fit, hinges, servo installation, power setup, CG, control checks and first-flight preparation.
GR-01 ExpressLRS 2.4GHz Receiver for DJI RS Camera Gimbals
Prices are intentionally not displayed on the site.
Contact RC-MODEL for current availability, technical fit, compatible accessories and a formal quote.
Why choose GR-01 ExpressLRS 2.4GHz Receiver for DJI RS Camera Gimbals through RC-MODEL?
GR-01 ExpressLRS 2.4GHz Receiver for DJI RS Camera Gimbals is an RC product from RadioMaster. This page focuses on what an end customer needs: fit, use cases, specifications and imagery, without prices or outbound supplier detours.
Fit and use
GR-01 ExpressLRS 2.4GHz Receiver for DJI RS Camera Gimbals fits customers looking for RadioMaster items in RadioMaster Accessories, Receiver, with RC-MODEL support for choosing the right configuration.
- Relevant category: RadioMaster Accessories, Receiver
- Product identification for inquiry: model HP0157.RX-GR-01 / SKU HP0157.RX-GR-01
Key details
- Weight: 18.80g(without antenna)
- Frequency: ISM2400MHz (2.4GHz)
- Frequency Range: 2400 MHz to 2480 MHz
- Voltage: 5V
- Dimension: 43.00×27.70×27.50mm
- Manufacturer: RadioMaster
Before ordering
- Confirm dimensions, power system, radio compatibility or material size before purchase.
- Ask us to match required accessories, adhesives, hardware, batteries or replacement parts.
- RC-MODEL helps with fit checks, availability, compatible accessories and a formal quote in Israel.
GR-01 ExpressLRS 2.4GHz Receiver for DJI RS Camera Gimbals is a RadioMaster product intended for RC aircraft, FPV, surface and telemetry receiver installations. This page presents the practical buying information in one place: compatibility, SKU, variants, radio protocol, use case and technical details.
The content is written for customer decision-making through RC-MODEL, without supplier prices or outbound purchase routes.
Key Advantages
- Organized for RC aircraft, FPV, surface and telemetry receiver installations.
- Part of the RadioMaster receiver range.
- RF/protocol context: ExpressLRS / ELRS, 2.4GHz.
- Compatibility note: the DJI RS2 and RS3 Pro camera gimbals.
- Includes local product imagery and structured specifications for customer comparison.
Core Specifications
- Product Code: HP0157.RX-GR-01
- Product Family: RadioMaster receiver range
- Protocol / RF: ExpressLRS / ELRS, 2.4GHz
- Compatibility: the DJI RS2 and RS3 Pro camera gimbals
- Voltage: 5V
- Frequency: ISM2400MHz (2.4GHz)
- Weight: 18.80g(without antenna)
- Item: GR-01 ExpressLRS 2.4GHz Receiver
- MCU: ESP8285
- RF Chip: SEMTECH SX1281
- Antenna: 2.4GHz Omni
- Frequency Range: 2400 MHz to 2480 MHz
- Firmware Version: ExpressLRS v3.3.0
Relevant RC Academy guides
Learn before you buy
These guides explain the setup, safety checks and accessory choices that usually matter for this product type.
Servo selection: torque, speed, gears and voltage
How to select servos for trainers, sport aircraft, large models, cars and boats without under-sizing a control surface.
How to balance an RC aircraft and find the correct CG
One of the most important setup guides: find the CG, install the flight battery, balance the aircraft and avoid nose-heavy or tail-heavy surprises.
Mandatory pre-flight checks for safer RC flying
A repeatable inspection routine for control direction, radio range, failsafe, battery, fasteners, propeller, CG and field readiness.
How to perform the first test flight of an RC aircraft
Ground checks, takeoff planning, trim passes, battery timing and first landing strategy for a new or repaired RC aircraft.
| Technical Specifications | |
| Manufacturer | RadioMaster |
| Brand | RadioMaster |
| Product Code | HP0157.RX-GR-01 |
| All Variant SKUs | HP0157.RX-GR-01 |
| Product Type | Receiver |
| RadioMaster Collections | Accessories |
| Product Family | RadioMaster receiver range |
| Application | RC aircraft, FPV, surface and telemetry receiver installations |
| Item | GR-01 ExpressLRS 2.4GHz Receiver |
| Weight | 18.80g(without antenna) |
| Compatibility | the DJI RS2 and RS3 Pro camera gimbals |
| Protocol / RF | ExpressLRS / ELRS, 2.4GHz |
| Frequency | ISM2400MHz (2.4GHz) |
| Antenna | 2.4GHz Omni |
| MCU | ESP8285 |
| RF Chip | SEMTECH SX1281 |
| Frequency Range | 2400 MHz to 2480 MHz |
| FW Target | RadioMaster RP1/2 2400 RX |
| Voltage | 5V |
| Dimension | 43.00×27.70×27.50mm |
| Firmware Version | ExpressLRS v3.3.0 |
| Output protocol | DJI RS Pro |
| Firmware flash method | UART or Wifi |
| Connector Type | NATO Port |
Tags: RadioMaster, HP0157.RX-GR-01, RadioMaster Accessories, Receiver, RC radio