Radio systems and receivers: choosing a reliable control link
Channels, receiver protocols, telemetry, range, redundancy and what to check before matching a transmitter to a model.
ERS-BA01 - Precision Barometric Altitude Sensor for ExpressLRS Systems
Prices are intentionally not displayed on the site.
Contact RC-MODEL for current availability, technical fit, compatible accessories and a formal quote.
Why choose ERS-BA01 - Precision Barometric Altitude Sensor for ExpressLRS Systems through RC-MODEL?
ERS-BA01 - Precision Barometric Altitude Sensor for ExpressLRS Systems is an RC product from RadioMaster. This page focuses on what an end customer needs: fit, use cases, specifications and imagery, without prices or outbound supplier detours.
Fit and use
ERS-BA01 - Precision Barometric Altitude Sensor for ExpressLRS Systems fits customers looking for RadioMaster items in RadioMaster Accessories, ERS Series Sensors, with RC-MODEL support for choosing the right configuration.
- Relevant category: RadioMaster Accessories, ERS Series Sensors
- Product identification for inquiry: model RM0157.ERS-BA01 / SKU RM0157.ERS-BA01
Key details
- Weight: 3.5g
- Operating voltage: 5-8.4V
- Size: 23.5 × 13 × 7mm
- Manufacturer: RadioMaster
- Brand: RadioMaster
- Product Code: RM0157.ERS-BA01
Before ordering
- Confirm dimensions, power system, radio compatibility or material size before purchase.
- Ask us to match required accessories, adhesives, hardware, batteries or replacement parts.
- RC-MODEL helps with fit checks, availability, compatible accessories and a formal quote in Israel.
ERS-BA01 - Precision Barometric Altitude Sensor for ExpressLRS Systems is a RadioMaster product intended for RF protocol expansion, ExpressLRS links and long-range radio-control setups. This page presents the practical buying information in one place: compatibility, SKU, variants, radio protocol, use case and technical details.
The content is written for customer decision-making through RC-MODEL, without supplier prices or outbound purchase routes.
Key Advantages
- Organized for RF protocol expansion, ExpressLRS links and long-range radio-control setups.
- Part of the ERS telemetry sensor range.
- RF/protocol context: ExpressLRS / ELRS, 2.4GHz, EdgeTX.
- Includes local product imagery and structured specifications for customer comparison.
Core Specifications
- Product Code: RM0157.ERS-BA01
- Product Family: ERS telemetry sensor range
- Protocol / RF: ExpressLRS / ELRS, 2.4GHz, EdgeTX
- Weight: 3.5g
- Real-Time Altitude Telemetry: Converts barometric pressure measurements into accurate relative altitude data for instant feedback on your radio.
- Expansion-Ready Pass-Through: Includes an in-and-out port for daisy-chaining additional ERS sensors without rewiring your setup.
- Seamless ExpressLRS Compatibility: Integrates easily with supported ExpressLRS PWM receivers via CRSF for fast and dependable data transmission.
- Item: ERS-BA01 Barometer Sensor
- Operating voltage: 5-8.4V
- Operating current: 9mA
- Altitude accuracy: ±0.5m
- Temperature range: -10 ℃ to +85 ℃
- Size: 23.5 × 13 × 7mm
Relevant RC Academy guides
Learn before you buy
These guides explain the setup, safety checks and accessory choices that usually matter for this product type.
How to bind an RC transmitter and receiver
A practical binding guide for matching protocol, bind mode, receiver power, model memory, control checks and common binding mistakes.
How to set failsafe correctly on an RC aircraft
Failsafe setup for electric and fuel aircraft: throttle behavior, receiver signal loss, switch positions and safe verification before flight.
How to set Dual Rates and Expo on an RC transmitter
Make an aircraft calmer for beginners by setting low rates, high rates and expo without hiding mechanical setup problems.
How to perform the first test flight of an RC aircraft
Ground checks, takeoff planning, trim passes, battery timing and first landing strategy for a new or repaired RC aircraft.
| Technical Specifications | |
| Manufacturer | RadioMaster |
| Brand | RadioMaster |
| Product Code | RM0157.ERS-BA01 |
| All Variant SKUs | RM0157.ERS-BA01 |
| Product Type | ERS Series Sensor |
| RadioMaster Collections | Accessories, ERS Series Sensor |
| Product Family | ERS telemetry sensor range |
| Application | RF protocol expansion, ExpressLRS links and long-range radio-control setups |
| Item | ERS-BA01 Barometer Sensor |
| Weight | 3.5g |
| Protocol / RF | ExpressLRS / ELRS, 2.4GHz, EdgeTX |
| Operating voltage | 5-8.4V |
| Operating current | 9mA |
| Temperature range | -10 ℃ to +85 ℃ |
| Size | 23.5 × 13 × 7mm |
| Real-Time Altitude Telemetry | Converts barometric pressure measurements into accurate relative altitude data for instant feedback on your radio. |
| Expansion-Ready Pass-Through | Includes an in-and-out port for daisy-chaining additional ERS sensors without rewiring your setup. |
| Seamless ExpressLRS Compatibility | Integrates easily with supported ExpressLRS PWM receivers via CRSF for fast and dependable data transmission. |
| Altitude accuracy | ±0.5m |
Tags: RadioMaster, RM0157.ERS-BA01, RadioMaster Accessories, ERS Series Sensors, RC radio