Radio systems and receivers: choosing a reliable control link
Channels, receiver protocols, telemetry, range, redundancy and what to check before matching a transmitter to a model.
AG01-V CNC Metal Gimbal Set
Prices are intentionally not displayed on the site.
Contact RC-MODEL for current availability, technical fit, compatible accessories and a formal quote.
Why choose AG01-V CNC Metal Gimbal Set through RC-MODEL?
AG01-V CNC Metal Gimbal Set is an RC product from RadioMaster. This page focuses on what an end customer needs: fit, use cases, specifications and imagery, without prices or outbound supplier detours.
Fit and use
AG01-V CNC Metal Gimbal Set fits customers looking for RadioMaster items in RadioMaster Accessories, Gimbals, with RC-MODEL support for choosing the right configuration.
- Relevant category: RadioMaster Accessories, Gimbals
- Product identification for inquiry: model HP0157.0072 / SKU HP0157.0072
Key details
- Weight: 76.1g/pc
- Size: 58.7*54.9*33.3mm
- Working voltage: DC 3.3V
- Quad bearing: Yes
- Manufacturer: RadioMaster
- Brand: RadioMaster
Before ordering
- Confirm dimensions, power system, radio compatibility or material size before purchase.
- Ask us to match required accessories, adhesives, hardware, batteries or replacement parts.
- RC-MODEL helps with fit checks, availability, compatible accessories and a formal quote in Israel.
AG01-V CNC Metal Gimbal Set is a RadioMaster product intended for transmitter feel, precision and control customization. This page presents the practical buying information in one place: compatibility, SKU, variants, radio protocol, use case and technical details.
The content is written for customer decision-making through RC-MODEL, without supplier prices or outbound purchase routes.
Key Advantages
- Organized for transmitter feel, precision and control customization.
- Part of the RadioMaster gimbal and control accessory range.
- Includes local product imagery and structured specifications for customer comparison.
Core Specifications
- Product Code: HP0157.0072
- Product Family: RadioMaster gimbal and control accessory range
- Weight: 76.1g/pc
- Name: AG01-V CNC Metal Gimbal
- Sensor type: Hall Sensor
- Working voltage: DC 3.3V
- Linearity: Real-time (No delay)
- Adjustable vertical travel range: 38°-54°
- Self-centering adjustment: Yes
- Easy mode adjustment: Yes
- Adjustable tension: Yes
- Quad bearing: Yes
- Temperature range: -20°C-85°C
Relevant RC Academy guides
Learn before you buy
These guides explain the setup, safety checks and accessory choices that usually matter for this product type.
How to bind an RC transmitter and receiver
A practical binding guide for matching protocol, bind mode, receiver power, model memory, control checks and common binding mistakes.
How to set failsafe correctly on an RC aircraft
Failsafe setup for electric and fuel aircraft: throttle behavior, receiver signal loss, switch positions and safe verification before flight.
How to set Dual Rates and Expo on an RC transmitter
Make an aircraft calmer for beginners by setting low rates, high rates and expo without hiding mechanical setup problems.
How to perform the first test flight of an RC aircraft
Ground checks, takeoff planning, trim passes, battery timing and first landing strategy for a new or repaired RC aircraft.
| Technical Specifications | |
| Manufacturer | RadioMaster |
| Brand | RadioMaster |
| Product Code | HP0157.0072 |
| All Variant SKUs | HP0157.0072 |
| Product Type | Gimbal |
| RadioMaster Collections | Accessories, Gimbals |
| Product Family | RadioMaster gimbal and control accessory range |
| Application | transmitter feel, precision and control customization |
| Weight | 76.1g/pc |
| Temperature range | -20°C-85°C |
| Size | 58.7*54.9*33.3mm |
| Working voltage | DC 3.3V |
| Linearity | Real-time (No delay) |
| Adjustable tension | Yes |
| Quad bearing | Yes |
| ① Set the lower travel limit | Turn the screw clockwise to reduce the travel. Turn the screw counter clockwise to increase the travel. Travel range (38-54°) |
| ② Set the upper travel limit | Turn the screw clockwise to reduce the travel. Turn the screw counter clockwise to increase the travel. Travel range (38-54°) |
| ③ Up and down spring tension | Turn the screw clockwise to increase the up and down spring tension. Turn the screw counter clockwise to reduce the up and down spring tension. |
| ④ Centering and Mode adjustment | When the screw is turned clockwise to its lowest point, this gimbal will not center in its up and down axis when the stick is released. When the screw is turned counter-clockwise to its highest point, this gimbal will center its up and down axis when the stic... |
| ⑤ Left and right spring tension | Turn the screw clockwise to increase the left and spring tension. Turn the screw counter clockwise to reduce the left and right spring tension. Throttle tension adjustment: When there is no tension up and down, the ⑥ screw adjusts the tension tightness, the ⑦... |
| Name | AG01-V CNC Metal Gimbal |
| Sensor type | Hall Sensor |
| Adjustable vertical travel range | 38°-54° |
| Self-centering adjustment | Yes |
| Easy mode adjustment | Yes |
Tags: RadioMaster, HP0157.0072, RadioMaster Accessories, Gimbals, RC radio