How to assemble an ARF RC aircraft step by step
A general ARF assembly workflow for many aircraft: dry fit, hinges, servo installation, power setup, CG, control checks and first-flight preparation.
PH256-SBACH 342 86'' 70cc ARF V2
Prices are intentionally not displayed on the site.
Contact RC-MODEL for current availability, technical fit, compatible accessories and a formal quote.
Why choose PH256-SBACH 342 86'' 70cc ARF V2 through RC-MODEL?
PH256-SBACH 342 86'' 70cc ARF V2 is an RC product from Phoenix Model. This page focuses on what an end customer needs: fit, use cases, specifications and imagery, without prices or outbound supplier detours.
Fit and use
PH256-SBACH 342 86'' 70cc ARF V2 fits customers looking for Phoenix Model items in 3D Aerobatic Aircraft, with RC-MODEL support for choosing the right configuration.
- Relevant category: 3D Aerobatic Aircraft
- Product identification for inquiry: model PH256-SBACH / SKU PH256-SBACH
Key details
- SERVO: Metal gear hi-torque servos
- 2 Aileron: hi-torque 40-55 kg ( Standard size: 20x40mm )
- 1 Rudder: hi-torque 16-22 kg ( Standard size: 20x40mm )
- Packing: Packing BOX DIMENSION - mm X mm X mm (L x W x H)
- 2 Elevator: hi-torque 30-40 kg ( Standard size: 20x40mm )
- 1 Throttle: hi-torque 12 kg ( Standard size: 20x40mm ) (Gas Power)
Before ordering
- Confirm dimensions, power system, radio compatibility or material size before purchase.
- Ask us to match required accessories, adhesives, hardware, batteries or replacement parts.
- RC-MODEL helps with fit checks, availability, compatible accessories and a formal quote in Israel.
PH256-SBACH 342 86'' 70cc ARF V2
PH256-SBACH 342 86'' 70cc ARF V2 is presented as an information-rich 3D aerobatic RC aircraft from Phoenix Model for RC-MODEL customers who want clear product data, official imagery, and practical comparison details without storefront pricing.
Key Specifications
- Wingspan: 2184mm (86 in)
- Length: 2166mm (85.3 in)
- Flying weight: 8400-8600gr
- Gear type: Carbon fiber for main gear (included)
- Spinner size: Carbon Spinner 95mm (included)
- Gravity CG: 170mm (6.7 in) Back from the leading edge of the wing, at the fuselage
- Engine 70-76cc Propeller: suit with your engine
- Fuel tank: 500ml
- SERVO: Metal gear hi-torque servos
- 2 Aileron: hi-torque 40-55 kg ( Standard size: 20x40mm )
- 2 Elevator: hi-torque 30-40 kg ( Standard size: 20x40mm )
- 1 Rudder: hi-torque 16-22 kg ( Standard size: 20x40mm )
Recommended Use
This catalog page is written for pilots, builders, racers, and RC hobby users comparing 3d aerobatic aircraft products. It highlights the manufacturer, model identity, application, and measurable details that matter when choosing compatible RC equipment.
Relevant RC Academy guides
Learn before you buy
These guides explain the setup, safety checks and accessory choices that usually matter for this product type.
Servo selection: torque, speed, gears and voltage
How to select servos for trainers, sport aircraft, large models, cars and boats without under-sizing a control surface.
How to balance an RC aircraft and find the correct CG
One of the most important setup guides: find the CG, install the flight battery, balance the aircraft and avoid nose-heavy or tail-heavy surprises.
Mandatory pre-flight checks for safer RC flying
A repeatable inspection routine for control direction, radio range, failsafe, battery, fasteners, propeller, CG and field readiness.
How to perform the first test flight of an RC aircraft
Ground checks, takeoff planning, trim passes, battery timing and first landing strategy for a new or repaired RC aircraft.
| Technical Specifications | |
| Product Type | ARF aircraft model |
| Length | 2166mm (85.3 in) |
| Wingspan | 2184mm (86 in) |
| Flying weight | 8400-8600gr |
| Gear type | Carbon fiber for main gear (included) |
| Spinner size | Carbon Spinner 95mm (included) |
| Gravity CG | 170mm (6.7 in) Back from the leading edge of the wing, at the fuselage |
| SERVO | Metal gear hi-torque servos |
| 2 Aileron | hi-torque 40-55 kg ( Standard size: 20x40mm ) |
| 1 Rudder | hi-torque 16-22 kg ( Standard size: 20x40mm ) |
| Feature | - Capable of both precise and extreme 3D aerobatics - Designed for compatibility with both GP-EP flight - Factory-painted Carbon fiber Spinner (included) - Factory-painted Carbon fiber Main langding gear and tail gear (included) - Factory-painted fiberglass c... |
| Colour chart | - White (# 21010) - Sky Blue (# 21053) - Corsair Blue ( #21019) - Ferrari Red (# 21023) - Cub Yellow (# 21030) - Black (# 21071) |
| Packing | Packing BOX DIMENSION - mm X mm X mm (L x W x H) |
| Engine 70-76cc Propeller | suit with your engine |
| Fuel tank | 500ml |
| 2 Elevator | hi-torque 30-40 kg ( Standard size: 20x40mm ) |
| 1 Throttle | hi-torque 12 kg ( Standard size: 20x40mm ) (Gas Power) |
Tags: Phoenix Model, PH256-SBACH 342 86'' 70cc ARF V2, RC Airplanes, 3D Aerobatic Aircraft