How to assemble an ARF RC aircraft step by step
A general ARF assembly workflow for many aircraft: dry fit, hinges, servo installation, power setup, CG, control checks and first-flight preparation.
RR Lentus (made by MPX) is a Electric Gliders catalog item from MULTIPLEX Modellsport GmbH & Co. KG, prepared for RC-MODEL customers with practical fitment guidance, structured specifications, product media and no supplier pricing.
Use it for building, upgrading or maintaining RC aircraft, gliders and model airframes where the exact part reference matters.
Check model compatibility, installation dimensions, weight, connector style, operating voltage, current rating, battery type, propeller fit or radio-system protocol as relevant. RC-MODEL can help confirm the correct part when you provide the model name and item number.
Source package/content note: ELAPOR® model fully built, with mounted drive motor ROXXY C35-48-990kv, Regulator ROXXY BL-control 755 S-BEC, folding propeller 11x7", 6x servos HS-65HB Carbonite, assembled M6 quick connect harness, finished clear canopy with seat and Decorated with instruments, wings with CFRP-ALU double spars and pre-applied Font and color design leading edge protection decor, stable landing protection film, Landing gear fuselage filler piece, illustrated instructions in 5 languages
Reference SKU/model: 1-03231. This page is part of the official MULTIPLEX catalog coverage at RC-MODEL.
These guides explain the setup, safety checks and accessory choices that usually matter for this product type.
A general ARF assembly workflow for many aircraft: dry fit, hinges, servo installation, power setup, CG, control checks and first-flight preparation.
How to select servos for trainers, sport aircraft, large models, cars and boats without under-sizing a control surface.
One of the most important setup guides: find the CG, install the flight battery, balance the aircraft and avoid nose-heavy or tail-heavy surprises.
A repeatable inspection routine for control direction, radio range, failsafe, battery, fasteners, propeller, CG and field readiness.
Ground checks, takeoff planning, trim passes, battery timing and first landing strategy for a new or repaired RC aircraft.
Embedded video for convenient viewing directly on the product page.
| Technical Specifications | |
| Manufacturer | MULTIPLEX Modellsport GmbH & Co. KG |
| Brand Family | ROXXY |
| Product Type | Electric Gliders |
| SKU | 1-03231 |
| Item No. | 1-03231 |
| Source Product ID | 8933 |
| Delivery Contents | ELAPOR® model fully built, with mounted drive motor ROXXY C35-48-990kv, Regulator ROXXY BL-control 755 S-BEC, folding propeller 11x7", 6x servos HS-65HB Carbonite, assembled M6 quick connect harness, finished clear canopy with seat and Decorated with instruments, wings with CFRP-ALU double spars and pre-applied Font and color design leading edge protection decor, stable landing protection film, Landing gear fuselage filler piece, illustrated instructions in 5 languages |
| Availability | InStock |
| Flight Experience | 2 - Hobby Pilots |
| Wingspan (mm) | 3000 |
| Assembly Time (Minutes) | 30 |
| Material | Elapor |
| Recommended Battery | 3S LiPo |
| Flight Time (Minutes) | 30 |
| Take-Off weight Electric (gramms) | 2400 |
| Take-Off weight Glider (gramms) | 2400 |
| Elevator | Yes |
| Rudder | Yes |
| Aileron | Yes |
| Engine Control | Yes |
Tags: MULTIPLEX, ROXXY, RR Lentus (made by MPX), RC Airplanes, ELAPOR Models, Gliders, Electric Gliders
We use essential cookies to operate the store. Optional cookies are used only with your consent. You can read the full policy here.