How to assemble an ARF RC aircraft step by step
A general ARF assembly workflow for many aircraft: dry fit, hinges, servo installation, power setup, CG, control checks and first-flight preparation.
RR TwinStar ND (made by MPX)
Prices are intentionally not displayed on the site.
Contact RC-MODEL for current availability, technical fit, compatible accessories and a formal quote.
RR TwinStar ND (made by MPX)
RR TwinStar ND (made by MPX) is a Motor Aircraft catalog item from MULTIPLEX Modellsport GmbH & Co. KG, prepared for RC-MODEL customers with practical fitment guidance, structured specifications, product media and no supplier pricing.
Recommended use
Use it for building, upgrading or maintaining RC aircraft, gliders and model airframes where the exact part reference matters.
What to confirm before ordering
Check model compatibility, installation dimensions, weight, connector style, operating voltage, current rating, battery type, propeller fit or radio-system protocol as relevant. RC-MODEL can help confirm the correct part when you provide the model name and item number.
Source package/content note: ELAPOR® model 95% complete, including 2x drive motors Permax BL-O 2830-1100, Complete cable set for drive and servos (can be separated on the wing using connectors), Controller MULTIcont BL-30 2 in 1, propellers 8x5" with aluminum spinners, 4 servos MULTIPLEX Tiny-S, Y adapter, pre-cut decal sheet and detailed instructions.
Key details
- Flight Experience: 2 - Hobby Pilots
- Wingspan (mm): 1420
- Assembly Time (Minutes): 240
- Material: Elapor
- Recommended Battery: 3S LiPo
- Flight Time (Minutes): 10
- Take-Off weight Electric (gramms): 1500
- Take-Off weight Glider (gramms): 0
- Elevator: Yes
- Rudder: Yes
- Aileron: Yes
- Engine Control: Yes
- Manufacturer: MULTIPLEX Modellsport GmbH & Co. KG
- Brand Family: MULTIPLEX
- Product Type: Motor Aircraft
Reference SKU/model: 1-00911. This page is part of the official MULTIPLEX catalog coverage at RC-MODEL.
Relevant RC Academy guides
Learn before you buy
These guides explain the setup, safety checks and accessory choices that usually matter for this product type.
Servo selection: torque, speed, gears and voltage
How to select servos for trainers, sport aircraft, large models, cars and boats without under-sizing a control surface.
How to balance an RC aircraft and find the correct CG
One of the most important setup guides: find the CG, install the flight battery, balance the aircraft and avoid nose-heavy or tail-heavy surprises.
Mandatory pre-flight checks for safer RC flying
A repeatable inspection routine for control direction, radio range, failsafe, battery, fasteners, propeller, CG and field readiness.
How to perform the first test flight of an RC aircraft
Ground checks, takeoff planning, trim passes, battery timing and first landing strategy for a new or repaired RC aircraft.
| Technical Specifications | |
| Manufacturer | MULTIPLEX Modellsport GmbH & Co. KG |
| Brand Family | MULTIPLEX |
| Product Type | Motor Aircraft |
| SKU | 1-00911 |
| Item No. | 1-00911 |
| Source Product ID | 4097 |
| Delivery Contents | ELAPOR® model 95% complete, including 2x drive motors Permax BL-O 2830-1100, Complete cable set for drive and servos (can be separated on the wing using connectors), Controller MULTIcont BL-30 2 in 1, propellers 8x5" with aluminum spinners, 4 servos MULTIPLEX Tiny-S, Y adapter, pre-cut decal sheet and detailed instructions. |
| Availability | InStock |
| Flight Experience | 2 - Hobby Pilots |
| Wingspan (mm) | 1420 |
| Assembly Time (Minutes) | 240 |
| Material | Elapor |
| Recommended Battery | 3S LiPo |
| Flight Time (Minutes) | 10 |
| Take-Off weight Electric (gramms) | 1500 |
| Take-Off weight Glider (gramms) | 0 |
| Elevator | Yes |
| Rudder | Yes |
| Aileron | Yes |
| Engine Control | Yes |
Tags: MULTIPLEX, RR TwinStar ND (made by MPX), RC Airplanes, ELAPOR Models, Motor Aircraft