Servo selection: torque, speed, gears and voltage
How to select servos for trainers, sport aircraft, large models, cars and boats without under-sizing a control surface.
BLS905X Brushless Tail Servo 8Kgf.cm 0.035sec/60° for 550-700 Helicopters
Prices are intentionally not displayed on the site.
Contact RC-MODEL for current availability, technical fit, compatible accessories and a formal quote.
Why choose BLS905X Brushless Tail Servo 8Kgf.cm 0.035sec/60° for 550-700 Helicopters through RC-MODEL?
BLS905X Brushless Tail Servo 8Kgf.cm 0.035sec/60° for 550-700 Helicopters is an RC product from KST Servos. This page focuses on what an end customer needs: fit, use cases, specifications and imagery, without prices or outbound supplier detours.
Fit and use
BLS905X Brushless Tail Servo 8Kgf.cm 0.035sec/60° for 550-700 Helicopters fits customers looking for KST Servos items in Helicopter Servos, Industrial & UAV Servos, Standard Servos, with RC-MODEL support for choosing the right configuration.
- Relevant category: Helicopter Servos, Industrial & UAV Servos, Standard Servos
- Product identification for inquiry: model KST-BR0023.0046 / SKU BR0023.0046
Key details
- Features: Hardened Steel Gears; Extreme torque and Excellent speed; CNC aluminium case; Brushless DC Motor; Two Ball Bearings
- Gear Set Material: Hardened Steel
- Size Class: Standard Servos
- Package Includes: 1 * BLS905X Brushless Servo; 1 Pack of Accessories; Download; KST BLS905X Servo Technical Specification
- Manufacturer: KST Servos
- Working Frequency: 760μs/560Hz
Before ordering
- Confirm dimensions, power system, radio compatibility or material size before purchase.
- Ask us to match required accessories, adhesives, hardware, batteries or replacement parts.
- RC-MODEL helps with fit checks, availability, compatible accessories and a formal quote in Israel.
BLS905X Brushless Tail Servo 8Kgf.cm 0.035sec/60° for 550-700 Helicopters is a KST Servos product selected for Helicopter Servos. This page is written for practical buying decisions, with the key fit, size, voltage and performance details organized in one place.
Use it to compare torque, speed, voltage range, construction, dimensions, weight, variants and accessory compatibility before choosing the right component for an RC aircraft, helicopter, car, glider, UAV or workshop installation.
Key Advantages
- Hardened Steel Gears
- Extreme torque and Excellent speed
- CNC aluminium case
- Brushless DC Motor
- Two Ball Bearings
Core Specifications
- Motor Type: Brushless DC Motor
- Gear Set Material: Hardened Steel
- Ball Bearing: 2 BB
- Case Dimensions: 40.5mm*20mm*38mm±0.2mm
- Weight: 70g±10%
- Item: BLS905X Brushless Tail Servo
- Operating Voltage: DC6.0V-8.4V
- Size: 40.50*20*37mm
- Torque: [email protected] / [email protected] / 6Kgf.cm @6.0V
- Speed: 0.035sec/60°@8.4V, 0.040sec/60°@7.4V, 0.045sec/60°@6.0V
- Working Frequency: 760μs/560Hz
- Temperature Range: -10℃……+65℃
Relevant RC Academy guides
Learn before you buy
These guides explain the setup, safety checks and accessory choices that usually matter for this product type.
Which servo fits each RC aircraft type?
A buying table for matching servo size, torque, speed, gear type and voltage to trainers, gliders, 3D aircraft, EDF jets and Giant Scale models.
How to install servos and linkages correctly
Mechanical setup guide for servo arms, linkage angles, throw, control horns, neutral position and radio setup after geometry is correct.
How to set Dual Rates and Expo on an RC transmitter
Make an aircraft calmer for beginners by setting low rates, high rates and expo without hiding mechanical setup problems.
How to set failsafe correctly on an RC aircraft
Failsafe setup for electric and fuel aircraft: throttle behavior, receiver signal loss, switch positions and safe verification before flight.
| Technical Specifications | |
| Manufacturer | KST Servos |
| Brand | KST |
| Product Code | BR0023.0046 |
| All Variant SKUs | BR0023.0046 |
| Working Frequency | 760μs/560Hz |
| Temperature Range | -10℃……+65℃ |
| Case Material | Aluminum Alloy |
| Motor Type | Brushless DC Motor |
| Gear Set Material | Hardened Steel |
| Position Sensor | Potentiometer |
| Ball Bearing | 2 BB |
| Case Dimensions | 40.5mm*20mm*38mm±0.2mm |
| Weight | 70g±10% |
| KST Collections | Helicopter Servos, Industrial, Standard Servos, BLS Series |
| Series | BLS Series |
| Size Class | Standard Servos |
| Application | Helicopter Servos |
| Features | Hardened Steel Gears; Extreme torque and Excellent speed; CNC aluminium case; Brushless DC Motor; Two Ball Bearings |
| Package Includes | 1 * BLS905X Brushless Servo; 1 Pack of Accessories; Download; KST BLS905X Servo Technical Specification |
| Item | BLS905X Brushless Tail Servo |
| Torque | [email protected] / [email protected] / 6Kgf.cm @6.0V |
| Speed | 0.035sec/60°@8.4V, 0.040sec/60°@7.4V, 0.045sec/60°@6.0V |
| Product Type | RC |
| Operating Voltage | DC6.0V-8.4V |
| Size | 40.50*20*37mm |
Tags: KST Servos, BR0023.0046, Helicopter Servos, Industrial & UAV Servos, Standard Servos, BLS Series, RC servo