Holybro SiK Telemetry Radio V3

Holybro SiK Telemetry Radio V3 is a Holybro catalog item in Telemetry & Data Links. Review the model details below and request compatibility and supply information for civilian use.

Model specifications

Manufacturer technical notes

This Holybro SiK Telemetry Radio is a small, light, and inexpensive open-source radio platform that typically allows ranges of better than 300m “out of the box” (the range can be extended to several kilometres with the use of a patch antenna on the ground). This radio is plug-n-play, ready for all Pixhawk Standard and other flight controllers, providing the easiest way to set up a telemetry connection between your Flight Controller and a ground station. It uses open-source firmware that has been specially designed to work well with MAVLink packets and to be integrated with the Mission Planner, Ardupilot, QGroundControl, PX4, and Flight Controller. The radios can be either 915 MHz or 433 MHz, and you should purchase the model that is appropriate for your country/region.

Open-source SIK firmware

Plug-n-play for Pixhawk Standard Flight Controllers

The Easiest way to connect your Flight Controller and Ground Station

Interchangeable air and ground radio

Micro-USB port (Type-C Adapter Cable Included)

6-position JST-GH connector

2-way full-duplex communication through adaptive TDM UART interface

Transparent serial link

MAVLink protocol framing

Built in FT230X/FT23 USB to BASIC UART conversion IC

Supply voltage: 100mW & 500mW version: 5V DC (from USB or JST-GH) 1W version: 7~28V DC via XT30

100mW & 500mW version: 5V DC (from USB or JST-GH)

1W version: 7~28V DC via XT30

Transmit current: 100 mA at 20 dBm

Receive current: 25 mA

Serial interface: 3.3 V UART

100mW & 500mW options Radio modules with antennas *2 Micro-USB to USB-A cable *1 Micro-USB to Micro-USB OTG adapter cable *1 Micro USB to Type-C Adapter JST-GH-6P to JST-GH-6P cable *1 (for Pixhawk Standard FC) JST-GH-6P to Molex DF13 6P (for Pix32, Pixhawk 2.4.6, etc.)

Radio modules with antennas *2

Micro-USB to USB-A cable *1

Micro-USB to Micro-USB OTG adapter cable *1

Micro USB to Type-C Adapter

JST-GH-6P to JST-GH-6P cable *1 (for Pixhawk Standard FC)

JST-GH-6P to Molex DF13 6P (for Pix32, Pixhawk 2.4.6, etc.)

Single 1W 1W Radio modules with antennas *1 High-gain omnidirectional antenna *1 Male Type-C to male Type-C USB cable *1 Male XT30 to female XT30 adapter cable *1 Male XT30 to female XT60 adapter cable *1 JST-GH-6P to JST-GH-6P cable *1 (for Pixhawk Standard FC) Rubber damping grommet *3

1W Radio modules with antennas *1

High-gain omnidirectional antenna *1

Male Type-C to male Type-C USB cable *1

Male XT30 to female XT30 adapter cable *1

Male XT30 to female XT60 adapter cable *1

Rubber damping grommet *3

Dual 1W 1W Radio modules with antennas *2 High-gain omnidirectional antenna *2 Male Type-C to male Type-C USB cable *1 Male XT30 to female XT30 adapter cable *1 Male XT30 to female XT60 adapter cable *1 JST-GH-6P to JST-GH-6P cable *1 (for Pixhawk Standard FC) Rubber damping grommet *3

1W Radio modules with antennas *2

High-gain omnidirectional antenna *2

Telemetry-Radio-V3-Quick-Start-Guide

Manufacturer technical and configuration tables

Manufacturer catalog configurations

Product inquiry

Availability, price, package contents and hardware revision are confirmed on inquiry. This listing does not assert local stock, a delivery date or official distributor status. Confirm voltage, connectors, firmware and operating requirements before use.

• Original manufacturer model information
• Manufacturer documentation