Holybro Kakute H7 Mini Stacks

Holybro Kakute H7 Mini Stacks is a Holybro catalog item in FPV Video Systems. Review the model details below and request compatibility and supply information for civilian use.

Model specifications

Manufacturer technical notes

All new High-quality MOSFETs with low internal resistance & heat generation, and individual metal heatsink

Separate drive & control circuit, reducing the electrical interference to the control circuit

Continuous current: 50A x4

Burst current: 60A x4

Battery support: 4-6S

PWM frequency: 8k to 96k

Support DShot 150/300/600/1200

Support MultiShot/OneShot/Proshot/PWM, etc.

ESC Telemetry Support

Onboard analog current sensor

1000uf 35v capacitor included

Dimensions: 46.6x38x6mm / Weight: 15.6g

Compatible with all major FPV receivers from vendors such as Fatshark, ImmersionRC, etc.

Supports the standard 40-channel set: band A, B, E, Fatshark, and Raceband.

SmartAudio input allows remote control by the flight controller. Change channel, transmit power, and more from Betaflight OSD, flight controller USB port, Taranis Lua Script, and more.

All parameters are controllable via a push-button on the side of the unit, for cases where SmartAudio is not used.

MMCX connector is durable and easy to use. Rated for 100s of mating cycles. Easy and quick antenna changes. No more ripped-off UFL connectors.

LED indicators for channel, band, and power. Allows easy check of vTX parameters simply by glancing at the quad.

Variable transmit power from 25 mW to 800 mW. Use 25 mW for a race and then easily switch to 800 mW for freestyle.

0.5 mW True Pit Mode allows you to power up safely without the risk of knocking other pilots out of the air.

Built-in microphone, so you can listen to your motors while you fly, no matter how far away you fly.

Standard 26mm form factor allows you to mount the Atlatl directly on your flight controller stack.

Output Power: 0.5 mW (pit mode), 25 mW, 200 mW, 500 mW, 800 mW

Audio: 6.5 MHz Mono

Protocol: SmartAudio 2.0

Antenna Connector: MMCX

Input Voltage: 7 to 28 volts (2-6S LiPo)

Dimensions: 30x26mm

Mounting Holes: Standard 20mm square to center of holes (M3)

1x Kakute H7 Mini STACK(FC+ESC+VTX)

1x Electrolytic capacitor: 1000uF 35V

1x JST SH 8pin to 8pin 65mm cable

1x JST SH 8pin to 8pin 25mm cable

1x JST SH 6pin 150mm cable

1x JST SH 6pin to GH 8pin 150mm cable

1x JST SH 6pin to GH 8pin 80mm cable

1x 80mm SMA--MMCX Cable

1x 60mm 5.8G Antenna

1x 150mm 4pin JST GH wire

Manufacturer catalog configurations

Product inquiry

Availability, price, package contents and hardware revision are confirmed on inquiry. This listing does not assert local stock, a delivery date or official distributor status. Confirm voltage, connectors, firmware and operating requirements before use.

• Original manufacturer model information
• Manufacturer documentation