Holybro Tekko32 F4 Metal 4in1 65A ESC (AM32)

Holybro Tekko32 F4 Metal 4in1 65A ESC (AM32) is a Holybro catalog item in ESCs & Motor Controllers. Review the model details below and request compatibility and supply information for civilian use.

Model specifications

Manufacturer technical notes

PWM Frequency: 16k to 96k

Metal-cased MOSFET for excellent heat dissipation

Massive on-board capacitance for noise filtering at 2068uf

3 oz copper PCB design to allow bigger current and better heat dissipation

Separate drive & control circuit, this broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit.

Continuous Current: 65A x4

Burst Current: 75A x4

Supports 4-6S battery

Supports DShot 150/300/600/1200 & MultiShot/OneShot/Proshot/PWM etc.

ESC telemetry Supported

Onboard analog current sensor

AM32 firmware (target: AM32_TEKKO32_4IN1_F421)

1000uf 35v capacitor included (highly recommended for 6s setup)

Amperage meter scale ratio: 180

Dimensions: 43 x 44mm / Weight: 15.8g

Mounting holes: M4 30.5x30.5mm (M3 grommets included)

Air flow for the ESC is very important if you want to run this 4in1 in high current.The battery wire (from Lipo to 4in1 ESC) should be at least 12AWG and well soldered.PIN MAP

Tekko32 F4 Metal 4in1 65A ESC *1M3 Anti-Vibration Silicone Grommet Insert *4Electrolytic capacitor: 1000uF 35v *18pin to 8pin 1mm pitch 65mm cable *18pin to 8pin 1mm pitch 25mm cable *1

Tekko32 F4 Metal 4in1 ESC(65A) SPEC

ESC Current Sensor Scale

AM32 ESC Firmware Overview

AM32 ESC Firmware Overview AM32 ESC Configurator

Product inquiry

Availability, price, package contents and hardware revision are confirmed on inquiry. This listing does not assert local stock, a delivery date or official distributor status. Confirm voltage, connectors, firmware and operating requirements before use.

• Original manufacturer model information
• Manufacturer documentation
• Manufacturer documentation