Radio systems and receivers: choosing a reliable control link
Channels, receiver protocols, telemetry, range, redundancy and what to check before matching a transmitter to a model.
Holybro Zephyr ELRS Gemini X dual band receiver is a Holybro catalog item in Telemetry & Data Links. Review the model details below and request compatibility and supply information for civilian use.
| Brand | Holybro |
|---|---|
| Model | Zephyr ELRS Gemini X dual band receiver |
| Manufacturer SKU | 17034 |
The Zephyr receiver is an ELRS Gemini X dual-band, true diversity receiver manufactured by Holybro. Equipped with Semtech's third-generation LR1121 transceiver and the ESPRESSIF ESP32-PICO-D4 processor, the Holybro Zephyr can be configured in either 915MHz (sub-GHz) or 2.4GHz LoRa mode. The Holybro Zephyr utilizes a diversity reception system, which offers a wider signal range and a more stable connection than conventional receivers. It also features a built-in Wi-Fi antenna, allowing for firmware upgrades via Wi-Fi.
Visit ELRS Gemini to learn more.
Processor: ESP32-PICO-D4
RF Chip: Semtech LR1121 * 2
900MHz TX Power (MAX):100mW(20dBm)
2.4GHz TX Power (Max): 100mW(20dBm)
Antenna Frequency Range: 902-928MHz & 2400-2500MHz
Antenna Gain: 3±1 dBi
Antenna SWR: less than 1.5
Receiver Maximum Refresh Rate: 500Hz
Receriver Minimum Refresh Rate: 50Hz
Modulation: LoRa, FSK
Input Voltage: DC 4-7V
Current Rating: 5V/350mA(Max)
Connector: SH1.0
Antenna Connector: IPEX1
Dimension (w/o antenna): 16 x 27 x 5mm
Weight: 2.3g(w/o antenna)/11g(w/ antenna)
1 x Holybro Zephyr Gemini X receiver
2 x Dual-band T-antenna
1 x SH1.0 4-pin cable
1 x Heatshrink tube
ELRS Quick Start Guide
Availability, price, package contents and hardware revision are confirmed on inquiry. This listing does not assert local stock, a delivery date or official distributor status. Confirm voltage, connectors, firmware and operating requirements before use.
These guides explain the setup, safety checks and accessory choices that usually matter for this product type.
Channels, receiver protocols, telemetry, range, redundancy and what to check before matching a transmitter to a model.
A practical binding guide for matching protocol, bind mode, receiver power, model memory, control checks and common binding mistakes.
Failsafe setup for electric and fuel aircraft: throttle behavior, receiver signal loss, switch positions and safe verification before flight.
Make an aircraft calmer for beginners by setting low rates, high rates and expo without hiding mechanical setup problems.
Ground checks, takeoff planning, trim passes, battery timing and first landing strategy for a new or repaired RC aircraft.
We use essential cookies to operate the store. Optional cookies are used only with your consent. You can read the full policy here.