Holybro PM07 Power Module (14S)

Holybro PM07 Power Module (14S) is a Holybro catalog item in Power Modules & Distribution. Review the model details below and request compatibility and supply information for civilian use.

Model specifications

Manufacturer technical notes

This PM07 Power Module supplies clean 5.2V to flight controller from the battery and provides current consumption and battery voltage measurements via analog signal through a 6 Pin JST-GH cable, along with integrated esc power & signal distribution for up to 8 ESCs. PM07 has two 5.2V power output port that can provide redundant power to the flight controller, with independent circuits, BEC IC and circuitry. It is also great for flight controller that do not have built-in servo header pins like the Pixhawk 6C & Pixhawk 4. It comes with pre-soldered wires, capacitor, and XT60 connector.

Input voltage: 2S-14S

PCB Cont. Current Rating: 90A

PCB Burst Current Rating: 140A (<60 Sec)

Output: DC 5.2V & 3A Max

Voltage Divider: 18.182

Amperes per Volt: 36.364

The PM07 12S version has been discontinued and replaced by the 14S version.

The XT60 Plug and 12AWG wire that are pre-soldered on the board is rating for 30A continuous current and 60A burst current (< 60 Seconds). If a higher current is being used, the plug type and wire size should be changed accordingly. You can refer to this chart for reference.

This PM07 Power Module uses analog data output and is not compatible to the Pixhawk 5X & 6X (Requires a digital PM like PM02D).

Mechanical Specification:

Dimensions:68*50*10 mm

Mounting Holes:45*45mm

Setup guide for PX4 & Ardupilot can be found in the Holybro Doc here.PM07 User guide can be found here

1x 80mm XT60 connector wire (installed)

1x Electrolytic capacito: 220uF 63V (installed)

2x JST GH 10P Cable

1x JST GH 8P Cable

2x JST GH 6P Cable

Product inquiry

Availability, price, package contents and hardware revision are confirmed on inquiry. This listing does not assert local stock, a delivery date or official distributor status. Confirm voltage, connectors, firmware and operating requirements before use.

• Original manufacturer model information
• Manufacturer documentation
• Manufacturer documentation
• Manufacturer documentation