Servo selection: torque, speed, gears and voltage
How to select servos for trainers, sport aircraft, large models, cars and boats without under-sizing a control surface.
Servo connectors 8pin, plug & socket, 2 pairs
Prices are intentionally not displayed on the site.
Contact RC-MODEL for current availability, technical fit, compatible accessories and a formal quote.
Servo connectors 8pin, plug & socket, 2 pairs
Servo connectors 8pin, plug & socket, 2 pairs is a professional Wing & Fuselage Connectors item from Hacker Motor GmbH, prepared for the RC-MODEL catalog with customer-facing information, official product imagery, structured specifications and no storefront supplier pricing.
Recommended use
This product is relevant for RC builders and pilots looking for wing & fuselage connectors, replacement parts, upgrades or setup components. Use it when planning a new model build, maintaining an existing aircraft, boat or radio system, or comparing compatible electronic and power-system parts.
What to check before ordering
Confirm the physical dimensions, weight, voltage, current rating, connector style, shaft size, cell count, propeller range and installation space against your model. RC-MODEL can help verify compatibility when you provide the model name and part number.
Key details
- Permanent current: 6A/Pin
- Peak current: 10A/Pin
- Anzahl Pins: 8
- Verriegelung: nein
- Gewicht Stecker g: 1,2g
- Gewicht Buchse g: 1,2g
- Abmessungen Stecker (ohne Kontakte): 8,4 x 19,3 x 7mm
- Abmessungen Buchse (ohne Kontakte): 11 x 20 x 7mm
- Einbautiefe Stecker (mit Kontakten): 12,8mm
- Einbautiefe Buchse (mit Kontakten): 15,4mm
- Gehäusefarbe: grün
- Manufacturer: Hacker Motor GmbH
- Product Type: Wing & Fuselage Connectors
Servo connectors 8pin, plug & socket, 2 pairs Servo connectors 8 pins, plug and socket. Suitable e. g. for connecting servos or lighting items. Available optionally with or without soldering PCB and fastening set. Delivery contents Variant without PCBs: 2 pairs sockets and plugs Variant with PCBs: 2 pairs sockets and plugs, 4 soldering PCBs. Variant with PCBs an fastening set: 2 pairs sockets and plugs, 4 soldering PCBs, 4 cable ties and 4 shrinking hoses. Hint: The PCBs should be soldered when
Reference SKU/model: A85305. Mention this reference when contacting RC-MODEL for availability or fitment support.
Relevant RC Academy guides
Learn before you buy
These guides explain the setup, safety checks and accessory choices that usually matter for this product type.
Which servo fits each RC aircraft type?
A buying table for matching servo size, torque, speed, gear type and voltage to trainers, gliders, 3D aircraft, EDF jets and Giant Scale models.
How to install servos and linkages correctly
Mechanical setup guide for servo arms, linkage angles, throw, control horns, neutral position and radio setup after geometry is correct.
How to set Dual Rates and Expo on an RC transmitter
Make an aircraft calmer for beginners by setting low rates, high rates and expo without hiding mechanical setup problems.
How to set failsafe correctly on an RC aircraft
Failsafe setup for electric and fuel aircraft: throttle behavior, receiver signal loss, switch positions and safe verification before flight.
| Technical Specifications | |
| Manufacturer | Hacker Motor GmbH |
| Product Type | Wing & Fuselage Connectors |
| SKU | A85305 |
| Availability | In stock |
| Permanent current | 6A/Pin |
| Peak current | 10A/Pin |
| Gewicht Stecker g | 1,2g |
| Gewicht Buchse g | 1,2g |
| Gehäusefarbe | grün |
| Anzahl Pins | 8 |
| Verriegelung | nein |
| Abmessungen Stecker (ohne Kontakte) | 8,4 x 19,3 x 7mm |
| Abmessungen Buchse (ohne Kontakte) | 11 x 20 x 7mm |
| Einbautiefe Stecker (mit Kontakten) | 12,8mm |
| Einbautiefe Buchse (mit Kontakten) | 15,4mm |
Tags: Hacker Motor GmbH, Servo connectors 8pin, plug & socket, 2 pairs, Parts & Accessories, Wing & Fuselage Connectors