How to assemble an ARF RC aircraft step by step
A general ARF assembly workflow for many aircraft: dry fit, hinges, servo installation, power setup, CG, control checks and first-flight preparation.
A50-12 L-Glider kv355
Prices are intentionally not displayed on the site.
Contact RC-MODEL for current availability, technical fit, compatible accessories and a formal quote.
A50-12 L-Glider kv355
A50-12 L-Glider kv355 is a professional A50-Glider item from Hacker Motor GmbH, prepared for the RC-MODEL catalog with customer-facing information, official product imagery, structured specifications and no storefront supplier pricing.
Recommended use
This product is relevant for RC builders and pilots looking for a50-glider, replacement parts, upgrades or setup components. Use it when planning a new model build, maintaining an existing aircraft, boat or radio system, or comparing compatible electronic and power-system parts.
What to check before ordering
Confirm the physical dimensions, weight, voltage, current rating, connector style, shaft size, cell count, propeller range and installation space against your model. RC-MODEL can help verify compatibility when you provide the model name and part number.
Key details
- max. power range [W] (max.15 sec.): 1650
- Poles: 14
- Turns: 12
- Idle current (I0) at 8.4V [A]: 1,5
- Internal resistance (Ri) [Ohm]: 0,021
- Recommended timing [°]: 20 - 25
- Switching Frequency [kHz]: 8
- Controller recommendation [A] (depending on setup): 70
- Idle speed per volt (kv): 355
- Weight [g]: 503
- Length [mm]/[in]: 120,5
- Outer diameter [mm]/[in]: 58
- Shaft diameter [mm]/[in]: 6
- Prop Adapter: Nein
A50-12 L-Glider kv355 Product description and features The Glider motor fits seamlessly into our range of sail noses/FES drives. Due to the shaft extension with integrated support bearing, this drive can also be installed in slim sail noses. The shaft can be easily moved by loosening the three M3 screws on the back. The model can be converted to a glider in no time. It is possible to switch between electric flight and glider towing. The shaft has a diameter of 6 mm, for the use of the usual prop
Reference SKU/model: 97826833. Mention this reference when contacting RC-MODEL for availability or fitment support.
Relevant RC Academy guides
Learn before you buy
These guides explain the setup, safety checks and accessory choices that usually matter for this product type.
Servo selection: torque, speed, gears and voltage
How to select servos for trainers, sport aircraft, large models, cars and boats without under-sizing a control surface.
How to balance an RC aircraft and find the correct CG
One of the most important setup guides: find the CG, install the flight battery, balance the aircraft and avoid nose-heavy or tail-heavy surprises.
Mandatory pre-flight checks for safer RC flying
A repeatable inspection routine for control direction, radio range, failsafe, battery, fasteners, propeller, CG and field readiness.
How to perform the first test flight of an RC aircraft
Ground checks, takeoff planning, trim passes, battery timing and first landing strategy for a new or repaired RC aircraft.
| Technical Specifications | |
| Manufacturer | Hacker Motor GmbH |
| Product Type | A50-Glider |
| SKU | 97826833 |
| EAN | 4250320240686 |
| Availability | In stock |
| Weight [g] | 503 |
| Poles | 14 |
| Turns | 12 |
| Idle current (I0) at 8.4V [A] | 1,5 |
| Internal resistance (Ri) [Ohm] | 0,021 |
| Recommended timing [°] | 20 - 25 |
| Switching Frequency [kHz] | 8 |
| Controller recommendation [A] (depending on setup) | 70 |
| Length [mm]/[in] | 120,5 |
| Outer diameter [mm]/[in] | 58 |
| Shaft diameter [mm]/[in] | 6 |
| Prop Adapter | Nein |
| Gold plug mm (recommended) | 4 |
| Backmount mountable | Nein |
| Front mountable | Ja |
| max. power range [W] (max.15 sec.) | 1650 |
| Mounting cross | Ja |
| Idle speed per volt (kv) | 355 |
Tags: Hacker Motor GmbH, A50-12 L-Glider kv355, Engines & Power, Electric Motors, Hacker Outrunner, Hacker A50, A50-Glider