How to assemble an ARF RC aircraft step by step
A general ARF assembly workflow for many aircraft: dry fit, hinges, servo installation, power setup, CG, control checks and first-flight preparation.
A30-12 XL-Glider kv700
Prices are intentionally not displayed on the site.
Contact RC-MODEL for current availability, technical fit, compatible accessories and a formal quote.
A30-12 XL-Glider kv700
A30-12 XL-Glider kv700 is a professional A30 item from Hacker Motor GmbH, prepared for the RC-MODEL catalog with customer-facing information, official product imagery, structured specifications and no storefront supplier pricing.
Recommended use
This product is relevant for RC builders and pilots looking for a30, replacement parts, upgrades or setup components. Use it when planning a new model build, maintaining an existing aircraft, boat or radio system, or comparing compatible electronic and power-system parts.
What to check before ordering
Confirm the physical dimensions, weight, voltage, current rating, connector style, shaft size, cell count, propeller range and installation space against your model. RC-MODEL can help verify compatibility when you provide the model name and part number.
Key details
- max. power range [W] (max.15 sec.): 650
- Poles: 14
- Idle current (I0) at 8.4V [A]: 1,5
- Internal resistance (Ri) [Ohm]: 0,034
- Recommended timing [°]: 20 - 25
- Switching Frequency [kHz]: 8
- Controller recommendation [A] (depending on setup): 55 - 70
- Idle speed per volt (kv): 700
- Weight [g]: 205
- Outer diameter [mm]/[in]: 37,2
- Shaft diameter [mm]/[in]: 5
- Prop Adapter: Nein
- Mounting cross: Ja
- Gold plug mm (soldered): 3,5
A30-12 XL V4 kv700 Product description and features This small and lightweight outrunner is offered in four lengths (S, M, L, XL). The A30 motors, are perfect for operation on 3S or 4S LiPo batteries. The A30-V4 series comes with an optimized integrated fan and high quality ball bearings. This increases efficiency, stability and increases the range of use. The perfect drive in motor models, electric gliders, paragliders and 3D models. This weight-optimized high-end motor with a weight of only 17
Reference SKU/model: 97816203. Mention this reference when contacting RC-MODEL for availability or fitment support.
Relevant RC Academy guides
Learn before you buy
These guides explain the setup, safety checks and accessory choices that usually matter for this product type.
Servo selection: torque, speed, gears and voltage
How to select servos for trainers, sport aircraft, large models, cars and boats without under-sizing a control surface.
How to balance an RC aircraft and find the correct CG
One of the most important setup guides: find the CG, install the flight battery, balance the aircraft and avoid nose-heavy or tail-heavy surprises.
Mandatory pre-flight checks for safer RC flying
A repeatable inspection routine for control direction, radio range, failsafe, battery, fasteners, propeller, CG and field readiness.
How to perform the first test flight of an RC aircraft
Ground checks, takeoff planning, trim passes, battery timing and first landing strategy for a new or repaired RC aircraft.
| Technical Specifications | |
| Manufacturer | Hacker Motor GmbH |
| Product Type | A30 |
| SKU | 97816203 |
| EAN | 4250320240662 |
| Availability | In stock |
| Weight [g] | 205 |
| Poles | 14 |
| Idle current (I0) at 8.4V [A] | 1,5 |
| Internal resistance (Ri) [Ohm] | 0,034 |
| Recommended timing [°] | 20 - 25 |
| Switching Frequency [kHz] | 8 |
| Controller recommendation [A] (depending on setup) | 55 - 70 |
| Outer diameter [mm]/[in] | 37,2 |
| Shaft diameter [mm]/[in] | 5 |
| Prop Adapter | Nein |
| Backmount mountable | Nein |
| Front mountable | Ja |
| max. power range [W] (max.15 sec.) | 650 |
| Mounting cross | Ja |
| Idle speed per volt (kv) | 700 |
| Gold plug mm (soldered) | 3,5 |
Tags: Hacker Motor GmbH, A30-12 XL-Glider kv700, Engines & Power, Electric Motors, Hacker Outrunner, Hacker A30, A30