How to assemble an ARF RC aircraft step by step
A general ARF assembly workflow for many aircraft: dry fit, hinges, servo installation, power setup, CG, control checks and first-flight preparation.
C54-2D XL Glider 6,7:1 Competition Kv 1960
Prices are intentionally not displayed on the site.
Contact RC-MODEL for current availability, technical fit, compatible accessories and a formal quote.
C54-2D XL Glider 6,7:1 Competition Kv 1960
C54-2D XL Glider 6,7:1 Competition Kv 1960 is a professional Glider version item from Hacker Motor GmbH, prepared for the RC-MODEL catalog with customer-facing information, official product imagery, structured specifications and no storefront supplier pricing.
Recommended use
This product is relevant for RC builders and pilots looking for glider version, replacement parts, upgrades or setup components. Use it when planning a new model build, maintaining an existing aircraft, boat or radio system, or comparing compatible electronic and power-system parts.
What to check before ordering
Confirm the physical dimensions, weight, voltage, current rating, connector style, shaft size, cell count, propeller range and installation space against your model. RC-MODEL can help verify compatibility when you provide the model name and part number.
Key details
- Turns: 1,5 Y
- Idle current (I0) at 37V [A]: 3,5
- Internal resistance (Ri) [Ohm]: 0,009
- Gear reducing: 6,7:1
- Output shaft: 6mm
- Recommended timing [°]: 5-10
- Switching Frequency [kHz]: 8000
- Weight [g]: 520
- Manufacturer: Hacker Motor GmbH
- Product Type: Glider version
- SKU: 10108908
- EAN: 4250320267102
- Availability: In stock
C54-2D XL Glider 6,7:1 Competition Kv 1960 Produktbeschreibung und Features The Hacker C54 motors are compact 4-pole internal rotor motors with a 6.7:1 reduction gearbox and 6-millimetre shaft. In the Competition version, this is the most powerful internal rotor drive with high efficiency and very low weight. The C54 geared motors are available in two lengths and as a Glider or Acro version. Drive recommendation This design is recommended for sporty gliders with a take-off weight of approx. 16 t
Reference SKU/model: 10108908. Mention this reference when contacting RC-MODEL for availability or fitment support.
Relevant RC Academy guides
Learn before you buy
These guides explain the setup, safety checks and accessory choices that usually matter for this product type.
Servo selection: torque, speed, gears and voltage
How to select servos for trainers, sport aircraft, large models, cars and boats without under-sizing a control surface.
How to balance an RC aircraft and find the correct CG
One of the most important setup guides: find the CG, install the flight battery, balance the aircraft and avoid nose-heavy or tail-heavy surprises.
Mandatory pre-flight checks for safer RC flying
A repeatable inspection routine for control direction, radio range, failsafe, battery, fasteners, propeller, CG and field readiness.
How to perform the first test flight of an RC aircraft
Ground checks, takeoff planning, trim passes, battery timing and first landing strategy for a new or repaired RC aircraft.
| Technical Specifications | |
| Manufacturer | Hacker Motor GmbH |
| Product Type | Glider version |
| SKU | 10108908 |
| EAN | 4250320267102 |
| Availability | In stock |
| Weight [g] | 520 |
| Turns | 1,5 Y |
| Internal resistance (Ri) [Ohm] | 0,009 |
| Gear reducing | 6,7:1 |
| Recommended timing [°] | 5-10 |
| Switching Frequency [kHz] | 8000 |
| Output shaft | 6mm |
| Idle current (I0) at 37V [A] | 3,5 |
Tags: Hacker Motor GmbH, C54-2D XL Glider 6, 7:1 Competition Kv 1960, Engines & Power, Electric Motors, Hacker Inrunner, Hacker C54 Competition, Glider version