Radio systems and receivers: choosing a reliable control link
Channels, receiver protocols, telemetry, range, redundancy and what to check before matching a transmitter to a model.
ROTORFLIGHT VANTAC RF007 Archer+, Twin, FBL Helicopter Flight Controller - (Bulit-in AP/TW/TD receiver optional) is an original FrSky product from the Tandem TD dual-band radio system family. This page is organized for practical buying decisions, with the fit, RF protocol, channel count, voltage, compatible accessories and installation role presented clearly.
It is suited for radio receiver installations for RC aircraft, helicopters, gliders and advanced telemetry setups. The information focuses on what an end customer needs to choose confidently, without exposing supplier pricing or directing the customer away from RC-MODEL.
Available variants: RF007 Archer Plus; RF007 TWIN; RF007 TD
These guides explain the setup, safety checks and accessory choices that usually matter for this product type.
Channels, receiver protocols, telemetry, range, redundancy and what to check before matching a transmitter to a model.
A practical binding guide for matching protocol, bind mode, receiver power, model memory, control checks and common binding mistakes.
Failsafe setup for electric and fuel aircraft: throttle behavior, receiver signal loss, switch positions and safe verification before flight.
Make an aircraft calmer for beginners by setting low rates, high rates and expo without hiding mechanical setup problems.
Ground checks, takeoff planning, trim passes, battery timing and first landing strategy for a new or repaired RC aircraft.
| Technical Specifications | |
| Manufacturer | FrSky |
| Brand | FrSky |
| Product Code | 03021860 |
| Available Variants | RF007 Archer Plus; RF007 TWIN; RF007 TD |
| FrSky Collections | ACCESS (2.4G) Receivers, FLIGHT CONTROLLER, Modules, Radio Parts & Accessories, Receivers, TW (2.4G+2.4G) Receivers |
| Product Family | Tandem TD dual-band radio system |
| Application | radio receiver installations for RC aircraft, helicopters, gliders and advanced telemetry setups |
| Protocol / RF | ACCESS, Tandem TD 2.4GHz + 900MHz, Twin TW dual 2.4GHz, 2.4GHz, FBUS |
| Voltage | 16V, 5V, 80V |
| All Variant SKUs | 03021860, 03021861 |
| Note | When powering this RxUG port, do not introduce additional power input from other ports to ensure the safe operation of the connected devices. |
| ● Flight Controller Firmware | Rotorflight 2.x |
| ● Dimension | 43.5×31.2×13.7mm |
| ● Weight | 25.2g |
| RF007 ARCHER+ | Built-In 2.4G Archer Plus RS Receiver |
| RF007 TWIN | Built-In Dual 2.4G TW R6 Receiver |
| ● Operating Voltage Range | 5-16V |
| ● Operating Current (FC Only) | 125mA@5V |
| ● RxUG Port | For Upgrading Internal RX Firmware (In case of OTA upgrade failure) |
| ● MCU | STM32F722RET6 |
| ● Gyroscope (IMU) | ICM-42688P |
| ● Barometer | SPL06-001 |
| ● Blackbox Flash | 128MB |
| ● Servo Ports | Servo 1, Servo 2, Servo 3, Tail |
| ● ESC Ports | ESC (Throttle), RPM (Sensor), TLM (ESC Telemetry or other functions) |
| ● Other Ports | AUX and SBUS Out/In |
| ● Expansion Ports | Port A, C, and RxUG |
Tags: FrSky, 03021860, ACCESS Receivers, Flight Controllers, Modules, Radio Accessories, Receivers, Twin TW Receivers, Tandem TD Receivers, RC radio
We use essential cookies to operate the store. Optional cookies are used only with your consent. You can read the full policy here.