Radio systems and receivers: choosing a reliable control link
Channels, receiver protocols, telemetry, range, redundancy and what to check before matching a transmitter to a model.
FrSky PAS70 ADV Air Speed Sensor
Prices are intentionally not displayed on the site.
Contact RC-MODEL for current availability, technical fit, compatible accessories and a formal quote.
FrSky PAS70 ADV Air Speed Sensor is an original FrSky product from the FrSky telemetry and sensor range family. This page is organized for practical buying decisions, with the fit, RF protocol, channel count, voltage, compatible accessories and installation role presented clearly.
It is suited for telemetry monitoring, engine data, current, voltage, RPM, GPS or flight performance feedback. The information focuses on what an end customer needs to choose confidently, without exposing supplier pricing or directing the customer away from RC-MODEL.
Key Advantages
- FrSky ADVANCE (ADV) series has comprehensive sensor types and enhanced the performance and capability of the original sensor line, all ADV sensors fully support FBUS protocol and they are also S.Port compatible. With the FBUS protocol, the ADV sensors can be seamlessly paired with the FBUS capable receiver further simplifying the builds setup.
- The PAS70 ADV Sensor can be used to measure airspeed at the speed range of 0~270km/h (0~167.7 mile/h).
- Compatible with FBUS/S.Port protocol
Core Specifications
- Product Code: 03040104
- Product Family: FrSky telemetry and sensor range
- Protocol / RF: FBUS, S.Port
- Voltage: 10 V, 5V
- Operational Voltage: DC 4 -10 V
- Current consumption: 20mA@5V
- Measure airspeed range: 0~270km/h (0~167.7mile/h )
- Circuit Board: Weight 6.3g / Dimensions 33*22*10.16mm (L*W*H)
- Pitot Tube: Weight 4.4g / Length 101mm / Diameter 2.6mm
- Pitot Tube Hose: Clear silicon tubing, 3 feet (1 meter), 2mm ID, 4mm OD
- Manufacturer: FrSky
- Brand: FrSky
Relevant RC Academy guides
Learn before you buy
These guides explain the setup, safety checks and accessory choices that usually matter for this product type.
How to bind an RC transmitter and receiver
A practical binding guide for matching protocol, bind mode, receiver power, model memory, control checks and common binding mistakes.
How to set failsafe correctly on an RC aircraft
Failsafe setup for electric and fuel aircraft: throttle behavior, receiver signal loss, switch positions and safe verification before flight.
How to set Dual Rates and Expo on an RC transmitter
Make an aircraft calmer for beginners by setting low rates, high rates and expo without hiding mechanical setup problems.
How to perform the first test flight of an RC aircraft
Ground checks, takeoff planning, trim passes, battery timing and first landing strategy for a new or repaired RC aircraft.
| Technical Specifications | |
| Manufacturer | FrSky |
| Brand | FrSky |
| Product Code | 03040104 |
| FrSky Collections | SENSORS, SENSORS & MODULES |
| Product Family | FrSky telemetry and sensor range |
| Application | telemetry monitoring, engine data, current, voltage, RPM, GPS or flight performance feedback |
| Protocol / RF | FBUS, S.Port |
| Voltage | 10 V, 5V |
| All Variant SKUs | 03040104 |
| Operational Voltage | DC 4 -10 V |
| Current consumption | 20mA@5V |
| Measure airspeed range | 0~270km/h (0~167.7mile/h ) |
| Circuit Board | Weight 6.3g / Dimensions 33*22*10.16mm (L*W*H) |
| Pitot Tube | Weight 4.4g / Length 101mm / Diameter 2.6mm |
| Pitot Tube Hose | Clear silicon tubing, 3 feet (1 meter), 2mm ID, 4mm OD |
Tags: FrSky, 03040104, Sensors, Telemetry & Sensors, Advanced Engine Suite, RC radio