Servo selection: torque, speed, gears and voltage
How to select servos for trainers, sport aircraft, large models, cars and boats without under-sizing a control surface.
EcoPower WP860T 1/5 Scale Waterproof Metal Gear Servo for Large Scale ARRMA, Axial, HPI, Losi & others
Prices are intentionally not displayed on the site.
Contact RC-MODEL for current availability, technical fit, compatible accessories and a formal quote.
EcoPower WP860T 1/5 Scale Waterproof Metal Gear Servo for Large Scale ARRMA, Axial, HPI, Losi & others is a EcoPower product intended for steering, throttle, crawler, aircraft or general RC control installations. This page presents the practical buying information a customer needs: fit, SKU, image, category and technical specifications.
The content is written for purchasing through RC-MODEL, without supplier prices or links to competing stores.
Key Advantages
- Organized under the EcoPower servo range.
- Intended for steering, throttle, crawler, aircraft or general RC control installations.
- Includes local product imagery and structured specifications for easier comparison.
- Waterproof construction is highlighted where the model name specifies it.
- Metal construction or metal gears are identified where relevant to durability.
- Ideal for any 1/5 and 1/6 large scale vehicles
- Waterproof up to 1 meter
Core Specifications
- Manufacturer: EcoPower
- Brand: EcoPower
- Product Code: ECP-860T
- Product Family: EcoPower servo range
- Application: steering, throttle, crawler, aircraft or general RC control installations
- Scale: 1:5
- Torque: 6.0V: 667 oz-in (48 kg-cm) 8.4V: 861 oz-in (62 kg-cm)
- Dimensions: 2.36x1.18x2.5in (60x30x63x35mm)
- Weight: 195g
- AMain Product ID: 1500062
- Voltage Range: 6.0V - 8.4V
- Operating Temperature: 14° to 140° F (-10 to +60° C)
- Speeds: 6.0V: 0.15/60° sec 8.4V: 0.13/60° sec
- Motor Type: Brushed
Relevant RC Academy guides
Learn before you buy
These guides explain the setup, safety checks and accessory choices that usually matter for this product type.
Which servo fits each RC aircraft type?
A buying table for matching servo size, torque, speed, gear type and voltage to trainers, gliders, 3D aircraft, EDF jets and Giant Scale models.
How to install servos and linkages correctly
Mechanical setup guide for servo arms, linkage angles, throw, control horns, neutral position and radio setup after geometry is correct.
How to set Dual Rates and Expo on an RC transmitter
Make an aircraft calmer for beginners by setting low rates, high rates and expo without hiding mechanical setup problems.
How to set failsafe correctly on an RC aircraft
Failsafe setup for electric and fuel aircraft: throttle behavior, receiver signal loss, switch positions and safe verification before flight.
| Technical Specifications | |
| Manufacturer | EcoPower |
| Brand | EcoPower |
| Product Code | ECP-860T |
| AMain Product ID | 1500062 |
| Product Family | EcoPower servo range |
| Application | steering, throttle, crawler, aircraft or general RC control installations |
| Dimensions | 2.36x1.18x2.5in (60x30x63x35mm) |
| Weight | 195g |
| Scale | 1:5 |
| Motor Type | Brushed |
| Output Shaft | 15 Tooth |
| Waterproof | Yes |
| Operating Temperature | 14° to 140° F (-10 to +60° C) |
| Gears | Steel w/ Lifetime Gear Warranty |
| Pulse/Frequency | 1520 / 330hz |
| Voltage Range | 6.0V - 8.4V |
| Speeds | 6.0V: 0.15/60° sec 8.4V: 0.13/60° sec |
| Torque | 6.0V: 667 oz-in (48 kg-cm) 8.4V: 861 oz-in (62 kg-cm) |
| Height (Base to Mount) | 40.8mm |
Tags: EcoPower, ECP-860T, EcoPower servo range, EcoPower Catalog, EcoPower Servos, EcoPower RC Accessories, RC-MODEL