Why choose Hitec MICRO HORN SET (HS-60/81/85/5085MG/5087MH/HSG-5083MG) through RC-MODEL?
Hitec MICRO HORN SET (HS-60/81/85/5085MG/5087MH/HSG-5083MG) is an RC product from Hitec. This page focuses on what an end customer needs: fit, use cases, specifications and imagery, without prices or outbound supplier detours.
Fit and use
Hitec MICRO HORN SET (HS-60/81/85/5085MG/5087MH/HSG-5083MG) fits customers looking for Hitec items in Servo Parts, with RC-MODEL support for choosing the right configuration.
- Relevant category: Servo Parts
- Product identification for inquiry: model 56326 / SKU 56326
Key details
- Product Type: Hitec servo accessory
- Accessory Section: SERVO ACTUATOR HORN & HARDWARE SET
- Part Number: 56326
Before ordering
- Confirm dimensions, power system, radio compatibility or material size before purchase.
- Ask us to match required accessories, adhesives, hardware, batteries or replacement parts.
- RC-MODEL helps with fit checks, availability, compatible accessories and a formal quote in Israel.
Hitec MICRO HORN SET (HS-60/81/85/5085MG/5087MH/HSG-5083MG)
Hitec MICRO HORN SET (HS-60/81/85/5085MG/5087MH/HSG-5083MG) is presented as an information-rich servo part or accessory from Hitec for RC-MODEL customers who want clear product data, official imagery, and practical comparison details without storefront pricing.
Key Specifications
- Part Number: 56326
- Accessory Section: SERVO ACTUATOR HORN & HARDWARE SET
- Product Type: Hitec servo accessory
Recommended Use
This catalog page is written for pilots, builders, racers, and RC hobby users comparing servo parts products. It highlights the manufacturer, model identity, application, and measurable details that matter when choosing compatible RC equipment.
Product-specific guides
Buying and setup guides for Hitec MICRO HORN SET (HS-60/81/85/5085MG/5087MH/HSG-5083MG)
Use these notes to choose compatible accessories, plan assembly, order sensible spares and ask the right questions before buying Hitec MICRO HORN SET (HS-60/81/85/5085MG/5087MH/HSG-5083MG).
Compatibility guide
Compatibility and accessories
Before ordering Hitec MICRO HORN SET (HS-60/81/85/5085MG/5087MH/HSG-5083MG), match it to your setup, the Hitec brand context and the exact product code 56326. These are the first points we would confirm with you.
- Specification to verify: Product Type - Hitec servo accessory
- Specification to verify: Accessory Section - SERVO ACTUATOR HORN & HARDWARE SET
- Torque, speed, case size and weight
- Voltage range, digital or analog control and connector type
- Spline count, arm length and receiver compatibility
Find matching products
Assembly guide
Correct setup and adjustment
For Hitec MICRO HORN SET (HS-60/81/85/5085MG/5087MH/HSG-5083MG), installation quality matters as much as the product itself. Use the Hitec / 56326 identification to plan tools, setup order and final checks.
- Center the servo before installing the arm
- Set linkage geometry mechanically before radio trim
- Check endpoint travel so the servo never binds
Find matching products
Spare parts guide
Spare parts to prepare
For Hitec MICRO HORN SET (HS-60/81/85/5085MG/5087MH/HSG-5083MG), useful spares are the parts most likely to stop a flying, sailing or workshop day. Keep the exact code Hitec ready so RC-MODEL can match compatible items from 56326 where available.
- Servo arms, screws, grommets and extensions
- Replacement gears when available
- Control horns and pushrods matched to the surface load
Find matching products
Upgrade guide
Useful upgrade options
Upgrade Hitec MICRO HORN SET (HS-60/81/85/5085MG/5087MH/HSG-5083MG) only where it improves reliability, control, cooling, power margin or serviceability. We compare the current Hitec setup with the target use of 56326 before recommending parts.
- Higher torque for larger surfaces
- Metal gears for shock load and landing gear use
- High-voltage servos only with compatible receiver power
Find matching products
Questions and answers
Questions before buying
Before choosing Hitec MICRO HORN SET (HS-60/81/85/5085MG/5087MH/HSG-5083MG), send RC-MODEL the model code Hitec, your existing equipment and the way you plan to use it. That lets us answer with a practical fit recommendation instead of a generic answer.
- How much torque is required?
- Will the servo run on 4.8V, 6V or HV power?
- Does the spline match the arms already installed?
Ask RC-MODEL
Relevant RC Academy guides
Learn before you buy
These guides explain the setup, safety checks and accessory choices that usually matter for this product type.
Servos
How to select servos for trainers, sport aircraft, large models, cars and boats without under-sizing a control surface.
Buying guides
A buying table for matching servo size, torque, speed, gear type and voltage to trainers, gliders, 3D aircraft, EDF jets and Giant Scale models.
Building
Mechanical setup guide for servo arms, linkage angles, throw, control horns, neutral position and radio setup after geometry is correct.
Radio setup
Make an aircraft calmer for beginners by setting low rates, high rates and expo without hiding mechanical setup problems.
Safety setup
Failsafe setup for electric and fuel aircraft: throttle behavior, receiver signal loss, switch positions and safe verification before flight.
Product questions
Is Hitec MICRO HORN SET (HS-60/81/85/5085MG/5087MH/HSG-5083MG) suitable for my RC setup?
Hitec MICRO HORN SET (HS-60/81/85/5085MG/5087MH/HSG-5083MG) fits customers looking for a Hitec product in Servo Parts. Before ordering, send us your model type, dimensions, radio or power setup so we can confirm the correct fit.
What should I include when asking about Hitec MICRO HORN SET (HS-60/81/85/5085MG/5087MH/HSG-5083MG)?
Include product code or model 56326, intended use, desired quantity, items you already have and any size or weight limits. That helps us answer faster and more accurately.
Can RC-MODEL match accessories and parts for Hitec MICRO HORN SET (HS-60/81/85/5085MG/5087MH/HSG-5083MG)?
Yes. RC-MODEL can help match accessories, adhesives, hardware, batteries, replacement parts and supporting equipment so the product fits your setup properly.
How should I prepare Hitec MICRO HORN SET (HS-60/81/85/5085MG/5087MH/HSG-5083MG) before first use?
Check the manual, dimensions, connectors and required accessories for Hitec MICRO HORN SET (HS-60/81/85/5085MG/5087MH/HSG-5083MG). Dry fit or test electrically before permanent installation, then contact RC-MODEL if any compatibility detail is unclear.
Which spare parts should I consider with Hitec MICRO HORN SET (HS-60/81/85/5085MG/5087MH/HSG-5083MG)?
For Hitec MICRO HORN SET (HS-60/81/85/5085MG/5087MH/HSG-5083MG), useful spares depend on the product code 56326 and the way it will be used. We normally check wear items, adapters, hardware, consumables and parts that are difficult to improvise during a field day.
What upgrades make sense for Hitec MICRO HORN SET (HS-60/81/85/5085MG/5087MH/HSG-5083MG)?
The right upgrade for Hitec MICRO HORN SET (HS-60/81/85/5085MG/5087MH/HSG-5083MG) depends on the current setup and the target use of 56326. RC-MODEL can compare size, voltage, current, material and installation limits before recommending a stronger or more advanced option.
| Technical Specifications |
| Product Type |
Hitec servo accessory |
| Part Number |
56326 |
| Accessory Section |
SERVO ACTUATOR HORN & HARDWARE SET |
