Why choose HBC-2B(4) Wall Charger through RC-MODEL?
HBC-2B(4) Wall Charger is an RC product from Futaba. This page focuses on what an end customer needs: fit, use cases, specifications and imagery, without prices or outbound supplier detours.
Fit and use
HBC-2B(4) Wall Charger fits customers looking for Futaba items in Batteries & Chargers, with RC-MODEL support for choosing the right configuration.
- Relevant category: Batteries & Chargers
- Product identification for inquiry: model 01102285-1 / SKU 01102285-1
Key details
- Categories: Accessories > Chargers
- Product: Accessories, Chargers
- Product Type: Accessories Chargers
- Tx: 8.7 VDC – 170 mA
- Rx: 5.8 VDC – 150 mA
Before ordering
- Confirm dimensions, power system, radio compatibility or material size before purchase.
- Ask us to match required accessories, adhesives, hardware, batteries or replacement parts.
- RC-MODEL helps with fit checks, availability, compatible accessories and a formal quote in Israel.
HBC-2B(4) Wall Charger
HBC-2B(4) Wall Charger is presented as an information-rich RC battery or charger from Futaba for RC-MODEL customers who want clear product data, official imagery, and practical comparison details without storefront pricing.
Key Specifications
- Tx: 8.7 VDC – 170 mA
- Rx: 5.8 VDC – 150 mA
- Categories: Accessories > Chargers
- Product: Accessories, Chargers
- Product Type: Accessories Chargers
Recommended Use
This catalog page is written for pilots, builders, racers, and RC hobby users comparing batteries & chargers products. It highlights the manufacturer, model identity, application, and measurable details that matter when choosing compatible RC equipment.
Product-specific guides
Buying and setup guides for HBC-2B(4) Wall Charger
Use these notes to choose compatible accessories, plan assembly, order sensible spares and ask the right questions before buying HBC-2B(4) Wall Charger.
Compatibility guide
Compatibility and accessories
Before ordering HBC-2B(4) Wall Charger, match it to your setup, the Futaba brand context and the exact product code 01102285-1. These are the first points we would confirm with you.
- Specification to verify: Categories - Accessories > Chargers
- Specification to verify: Product - Accessories, Chargers
- Cell count, capacity, C rating and connector
- Physical size, weight and CG effect
- Charger compatibility and safe storage routine
Find matching products
Assembly guide
Correct setup and adjustment
For HBC-2B(4) Wall Charger, installation quality matters as much as the product itself. Use the Futaba / 01102285-1 identification to plan tools, setup order and final checks.
- Balance charge with the correct chemistry setting
- Secure the pack so it cannot move in flight
- Check voltage and temperature before and after use
Find matching products
Spare parts guide
Spare parts to prepare
For HBC-2B(4) Wall Charger, useful spares are the parts most likely to stop a flying, sailing or workshop day. Keep the exact code Futaba ready so RC-MODEL can match compatible items from 01102285-1 where available.
- Extra packs in the correct size rather than one oversized pack
- Connectors, straps and battery checker
- LiPo safe storage and transport accessories
Find matching products
Upgrade guide
Useful upgrade options
Upgrade HBC-2B(4) Wall Charger only where it improves reliability, control, cooling, power margin or serviceability. We compare the current Futaba setup with the target use of 01102285-1 before recommending parts.
- Higher quality packs when voltage sag is the limitation
- Correct capacity for CG and flight time
- Better charger before buying many packs
Find matching products
Questions and answers
Questions before buying
Before choosing HBC-2B(4) Wall Charger, send RC-MODEL the model code Futaba, your existing equipment and the way you plan to use it. That lets us answer with a practical fit recommendation instead of a generic answer.
- What connector and cell count does the model require?
- Will the pack fit without moving CG out of range?
- What flight time is realistic for the current draw?
Ask RC-MODEL
Relevant RC Academy guides
Learn before you buy
These guides explain the setup, safety checks and accessory choices that usually matter for this product type.
Radio systems
Channels, receiver protocols, telemetry, range, redundancy and what to check before matching a transmitter to a model.
Radio setup
A practical binding guide for matching protocol, bind mode, receiver power, model memory, control checks and common binding mistakes.
Safety setup
Failsafe setup for electric and fuel aircraft: throttle behavior, receiver signal loss, switch positions and safe verification before flight.
Radio setup
Make an aircraft calmer for beginners by setting low rates, high rates and expo without hiding mechanical setup problems.
Flying
Ground checks, takeoff planning, trim passes, battery timing and first landing strategy for a new or repaired RC aircraft.
Product questions
Is HBC-2B(4) Wall Charger suitable for my RC setup?
HBC-2B(4) Wall Charger fits customers looking for a Futaba product in Batteries & Chargers. Before ordering, send us your model type, dimensions, radio or power setup so we can confirm the correct fit.
What should I include when asking about HBC-2B(4) Wall Charger?
Include product code or model 01102285-1, intended use, desired quantity, items you already have and any size or weight limits. That helps us answer faster and more accurately.
Can RC-MODEL match accessories and parts for HBC-2B(4) Wall Charger?
Yes. RC-MODEL can help match accessories, adhesives, hardware, batteries, replacement parts and supporting equipment so the product fits your setup properly.
How should I prepare HBC-2B(4) Wall Charger before first use?
Check the manual, dimensions, connectors and required accessories for HBC-2B(4) Wall Charger. Dry fit or test electrically before permanent installation, then contact RC-MODEL if any compatibility detail is unclear.
Which spare parts should I consider with HBC-2B(4) Wall Charger?
For HBC-2B(4) Wall Charger, useful spares depend on the product code 01102285-1 and the way it will be used. We normally check wear items, adapters, hardware, consumables and parts that are difficult to improvise during a field day.
What upgrades make sense for HBC-2B(4) Wall Charger?
The right upgrade for HBC-2B(4) Wall Charger depends on the current setup and the target use of 01102285-1. RC-MODEL can compare size, voltage, current, material and installation limits before recommending a stronger or more advanced option.
| Technical Specifications |
| Categories |
Accessories > Chargers |
| Product |
Accessories, Chargers |
| Product Type |
Accessories Chargers |
| Tx |
8.7 VDC – 170 mA |
| Rx |
5.8 VDC – 150 mA |
